[JFM-jr]

Here is the email I sent to HP tuners. I had sent some previous emails that included Year Make Model.



I have disabled/turned off AFM function easily in the PCM. If I unplug the now useless AFM actuators in the exhaust I will get a CEL that can not be addressed in the DTC tables (under engine diagnostics) in the PCM. I would like to remove and unplug the physical AFM valves in my exhaust system and address the check engine light that will result from it.


Again I thank you for your time. There are actually quite a few people on the 6th Gen Camaro forum looking for this same exact information as well. I would like to report my findings there to share but would need to be 100% on my information I provide.

Response below:


If your referring to the exhaust valves they are in the FPCM no CCM on Camaro. AFM is active fuel management and that is in the pcm side of the software.

*

FPCM is 1 credit so 49.00 to license it.


download FPCM it's the fuel pump control module that has the codes for the exhaust valves

The email i was exchanging with is
jmoeller@hptuners.com the name is Jan Moeller perhaps she could guide you thru the process as she seems confident that what we are after is already available.