Quote:
Originally Posted by cengell
The M650-GM is the best way to go for a Camaro IMO, and I would suggest using the Tosh fiber optic into a JL TwK D8, that way you have full control of the sound and then a solid amp for the front & rear speakers and a sub amp. I choose the Alpine PDXF6 150 watts per channel constant current so the ohm of the speakers don't change output wattage. I choose the RF Prime 750 for $200 can't be beat and once the gain is set wow... I also choose 2 JL Audio 12TW3-D4 12 for the subs and I made a smaller box and get strong bass but making a bit larger and expect even more bass. But what important is setting the amps gain right and get 1 of Steve Meads DD-1+ meter and now blow out the JL subs and still have full trunk space for stuff and still clears the convertible top! This, in my opinion, is not needed to pay someone 2K to install as long you have the tools and knowledge to setup it all up. The only issue was the M650-GM as it needs to be mounted on the side of the glove box and that is where I gave up more than I could do without videos to help so I took it to a pro shop. Christopher P.S Most important is the choice of music and how good is the recording is the MOST important part I found in this process.
|
I've heard great things about the Twk-D8. I haven't used it yet. My SQ setup is in my CST-V:
Audison BitPlay HD
Audison BitOne
Audison Voce AV5.1K HD (5 channel) (front stage , center channel, and sub)
Audison Voce AV Quattro (4 channel) (bridged to midbass)
HertzHCP2 (rear fill)
Hybrid Audio Technologies (HAT) driver:
Legatia L1 Pro R2 tweeters
Legatia L3SE 3.7" center channel
Legatia L3SE 3.7" left and fright mid range
Legatia L8Se 8.85" midbass
2 x JL Audio W6 in cabin facing sealed box
I can run FLAC files through the BitPlayHD for the absolute highest possible audio quality, digital source > digital sound processor> digital amps >to speakers. I'm not sure if you are familiar with FLAC, but it's a lossless audio codec, only problem is most audio systems can't play these files (the bitplayHD can, and the new iphones and ipads running ios11 can also)
Right now, the system has dual connections into the bitone. digital input from the bitplay using the toslink fiber optic. High level inputs from the factory amp. We re considering going back, and installing the M650-GM, so that the entire system is fully digital.