|
I have considered this but more along the lines of a zl1 with a giant turbo added. People have done it in the past with supercharged cobras but have poor results. They actually report making more power after pulling off the blower.
I think they are using way too small of turbos and the same thing would happen to the stock Camaro turbo. It isn’t designed to flow tons of air at low boost. If your going to size a turbo for a zl1 you would want to consider that engine to be more like a 10.4L engine. 6.2L at 10psi from the blower would act like a 10.4L engine from the turbos perspective.
Normally if you wanted 1200hp a pair of 62mm turbos would be fine but you would never put anything that small on a 10.4L engine. They would choke off the engine. I can post up some turbo maps when I get home and it will make more sense.
I would love To take a zl1 and put a couple of 80mm or larger turbos on the thing.
|