Catch can install HELP!
1 Attachment(s)
hey guys
Bought my rx catch can not too long ago and have been putting the install off for some time now. From my research I gathered that the center hose goes to the lower intake port and the right hose goes to the upper intake port. Now all of the write ups i have read only have two hoses going to the catch can but mine has three. what is the third left hose go to? I have a pic on the attachment any help is very much appreciated!http:///Users/chrisreyes/Desktop/IMG_2221.jpg |
I may be wrong but I thought the 3rd one had something to do with a supercharger, for the ZL1 and such.
Edit: Well I googled it out of curiosity and it looks like the one for the ZL1's. From their site http://www.rxspeedworks.com/wp-conte...-Catch-Can.pdf Maybe you got a ZL1 one on accident. |
you only need 2. I think you can just cap the 2nd side one.
|
The three are for forced induction, you can cap the one and use the other two and it won't hurt anything. Was going to go the same route but decided to go with the two hoses instead.
|
sweet! thanks for the help guys, so just for clarification i need to block off the furthest left port and use the right two like the other rx cans? thanks again
|
You can always email your vendor and ask. This should have been part of the ordering process. Contact Apex-Speed... they will help you out.
|
Yes as the others have said you only need 2. The 3rd is for ZL1.
V8 |
That looks like the old style can like mine that only had 2 hoses. If that is the case the problem is that the new owners of RX don't have much knowledge about the old style cans that were sold by SC2150.
I would just use google. Im sure your research will comeback to C5 |
Quote:
|
All times are GMT -5. The time now is 08:53 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.