CAMARO6 - Wish list for things to change on 6th generation 2016 Camaro?

Page 5 of 24

Show 40 post(s) from this thread on one page

CAMARO6 (https://www.camaro6.com/forums/index.php)

- 2016+ Camaro: 6th Gen Camaro general forum (https://www.camaro6.com/forums/forumdisplay.php?f=155)

- - Wish list for things to change on 6th generation 2016 Camaro? (https://www.camaro6.com/forums/showthread.php?t=268201)

flyby

12-31-2012 07:14 AM

In all seriousness...the zr1 sub structure (alloy frame/body) which would maintain rigidity and lighten the load by several hundred pounds.

Camaro588

12-31-2012 08:01 AM

Quote:

Originally Posted by PalmerGA (Post 5973243)

1. Glovebox light
2. Do something about the crappy magnetic seatbelt strap thing on the seatback
3. Relocate the USB port somewhere other than inside the center console
4. Standard "donut" spare
5. Change the oval trunk opening - make it big enough to fit golf club bag in without first having to take out the driver & 3wood

:word:
It's a PIA!

Richy_Rich

12-31-2012 09:11 AM

"gloss piano black" option for replacing silver bits.

v8	01-02-2013 02:41 PM

Quote:

Originally Posted by v8 (Post 5972376)

lose 300-400lbs:
manufacture the front suspension(control arms) out of something lighter than the current steel (maybe aluminum)
carbon fiber/aluminum drive shaft

I know that wont lose all the weight but its a start
LT1 direct injection engine for the SS
thicker clear coat to reduce chips

I forgot to add:
Custom steering wheel

akCamaross

01-02-2013 02:51 PM

Bring back 2010-2011 steering wheel. And make a noticeable difference from the ls lt rs ss zl1.

Richy_Rich

01-11-2013 01:34 PM

Move it to ATS chassis, add the LT1 engine program and mix in some Gen1/2 styling.

My Wish List:

- Gen 6 ATS Camaro, SS - new Gen 7 Corvette LT1 V8 (450HP).

- Gen 6 ATS Camaro, 1LE (handling pak) - new Gen 7 Corvette LT1 V8 (450HP).

- Gen 6 ATS Z/28, whatever Gen 7 Vette Z06 LT was available (530HP)

- Gen 6 ZL1, whatever Gen 7 Corvette ZR-1 SC LT program was offered should go here (680hp)

Bhobbs

01-11-2013 07:07 PM

Make available with everything but a driver seat, gas, brake, clutch and steering wheel as a optional delete.

attymf

01-12-2013 09:23 AM

Instead of gas it shoud run on water. Speaking of water, it should be able to go under water in submarine mode.

mr02Z/28

01-13-2013 07:08 PM

6th Gen
- 3,400lbs
- 3.73 gears(posi on all models)
- a if a 4 banger is going to be the base, it should be around 320-325hp
- a Twin Turbo V-6 as option
- a V-8 on the SS and Z/28

Iroc2430

01-14-2013 03:37 AM

Heated Steering Wheel

Norm Peterson

01-14-2013 08:49 AM

Quote:

Originally Posted by Bhobbs (Post 6024137)

Make available with everything but a driver seat, gas, brake, clutch and steering wheel as a optional delete.

I like how you think.

I'd insist on the continued availability of at least 1LE-level chassis specs, but stop short of ZL1 dampers (unless the damping programming offered multiple choice and/or user tweaks).

Norm

meissen

01-14-2013 02:42 PM

I wish it'd have t-tops but alas I know that's not a possibility anymore... :( :( :( :(

AdamZ

01-19-2013 06:08 AM

Quote:

Originally Posted by karguy (Post 6056174)

The current car has to many practical diusadvantages due to the slightly cartoonish design that unfortunately is not as clean as the origional.
I hope those mistakes won't be repeated !

:paddle::paddle::paddle: How does my Camaro look like a cartoon :paddle:

Quote:

Originally Posted by karguy (Post 6056174)

I also hope the new one will also get a practical hatchback with a useful trunk.

Dafuq you need a trunk for. Just need enough room for nitrous :D

All times are GMT -5. The time now is 09:08 AM.

Page 5 of 24

Last »

Show 40 post(s) from this thread on one page