CAMARO6
Page 4 of 6 123 4 56
Show 40 post(s) from this thread on one page

CAMARO6 (https://www.camaro6.com/forums/index.php)
-   6th gen Camaro Convertible (https://www.camaro6.com/forums/forumdisplay.php?f=301)
-   -   Roll Bar - Anyone make one? (https://www.camaro6.com/forums/showthread.php?t=509042)

TLSTWIN 08-14-2018 02:48 PM
Quote:
Originally Posted by mbnwa (Post 10282376)
It will be removable, however from what I understand it's not something you would want to do like every week. In addition from what I understand the 5/6pt are bolt in while the 8pt will be welded into place, so my assumption would be the 8pt will not be removable while the 5 / 6pt will be removable.

In addition from my discussions the 5/6pt will allow the back seat to stay in place and not have to be removed after installation.
:thumb::popcorn:

FdeleonZ28 08-14-2018 04:59 PM
awesome man! cant wait to see it!

motorhead 08-14-2018 07:31 PM
Quote:
Originally Posted by driven2exceSS (Post 10246892)
Gave up.... went custom bolt in. Similar to the blue vert in post #16. The rollbar should be heading to the power coater tomorrow! Pic is of it only tact welded. When I left he was finishing the welds, adding some gussets, and then off she goes to get pretty... I expect it will be plenty good enough to get me on more tracks for HPDE events. If anyone has any negative comments, please back it up with details of what should be done different to better anyone else choosing or having to go this route. :respekt:
The onky real issue I see are your mounting plates. Since you have no frame to bolt to they should be minimum 6"x6" 1/8"thick with another 6x6" 1/8" plate on the underside with minimum of 4 3/8" bolts. Your over all layout looks good outside of knowing your tubing OD and wall thckness.

TLSTWIN 08-28-2018 07:53 PM
:pop2::popcorn:

mbnwa 08-28-2018 10:29 PM
Just a quick update, car is still at RPM they expect to have it finished by sometime next week based on the last update I got. As soon as I get additional information or pictures I will post back.

FdeleonZ28 09-05-2018 02:38 PM
Quote:
Originally Posted by mbnwa (Post 10296450)
Just a quick update, car is still at RPM they expect to have it finished by sometime next week based on the last update I got. As soon as I get additional information or pictures I will post back.
:popcorn::popcorn::popcorn::popcorn:

mbnwa 09-05-2018 02:48 PM
Quote:
Originally Posted by FdeleonZ28 (Post 10303031)
:popcorn::popcorn::popcorn::popcorn:
Looks like they just got the bar back from being color matched (flat black) they stated they should have the car finished by Friday afternoon and will provide pictures.

TLSTWIN 09-05-2018 03:49 PM
Quote:
Originally Posted by mbnwa (Post 10303040)
Looks like they just got the bar back from being color matched (flat black) they stated they should have the car finished by Friday afternoon and will provide pictures.
I was hoping for some progress pictures:cry:

mbnwa 09-05-2018 04:02 PM
Quote:
Originally Posted by TLSTWIN (Post 10303098)
I was hoping for some progress pictures:cry:
They have pics from along the way they said and would provide them to me, so I hope to be able to post progress pics when I get a copy of them all.

mbnwa 09-05-2018 05:56 PM
PICS!!!!!
 
12 Attachment(s)
Hello all, good news... Here are some pictures :)

TLSTWIN 09-05-2018 08:08 PM
Very nice:headbang:

Interested to see how the front bars install.

Definitely different mounting points than what we have seen from others.

Is this supposed to be "legal / accepted" for track use?

I like it. Mind if I ask the cost? U can PM if u prefer.

mbnwa 09-05-2018 08:17 PM
This setup is designed to be legal for track use.

Pricing for the Roll Bar is as follows (based on current prices on the website), however I had some other options that will be showing in the final pictures:
$1,995.00 Chromoly 4pt/SCCA or 5pt
$2,345.00 Chromoly 6pt <-- This is what's being installed.
$1,195.00 Mild Steel 4pt/SCCA or 5pt
$1,545.00 Mild Steel 6pt

Additional Options:
2X Seat Back Rests @ $199.95ea
1X Color Matched Fire Wall @ $145
2X RPM Rollbar 5 Point Camlock Twist @ $199.95ea
2X Seat Belt Kit @ $45.00ea
2X Door Bar Holders @ $49.95

TLSTWIN 09-05-2018 08:23 PM
Quote:
Originally Posted by mbnwa (Post 10303344)
This setup is designed to be legal for track use.

Pricing for the Roll Bar is as follows (based on current prices on the website), however I had some other options that will be showing in the final pictures:
$1,995.00 Chromoly 4pt/SCCA or 5pt
$2,345.00 Chromoly 6pt <-- This is what's being installed.
$1,195.00 Mild Steel 4pt/SCCA or 5pt
$1,545.00 Mild Steel 6pt

Additional Options:
2X Seat Back Rests @ $199.95ea
1X Color Matched Fire Wall @ $145
2X RPM Rollbar 5 Point Camlock Twist @ $199.95ea
2X Seat Belt Kit @ $45.00ea
2X Door Bar Holders @ $49.95
Nice, look forward to the finished product. Looks like the back seat side panels gotta be removed as well.

driven2exceSS 09-05-2018 08:24 PM
Looking good!!! They (James) emailed me today too, looking to see if I still had interest. Unfortunately just a month or so too late... I really really really tried to hold out too. Like literally over a year anyway!! Oh well enjoy!!! I may consider the upgrade if I ever run into any issues or choose to go with a more proper six point. What color you gonna go with?!?


All times are GMT -5. The time now is 08:38 AM.
Page 4 of 6 123 4 56
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.