Coupler for rotofab/95mm tb?
I searched but couldn't find anything. Anyone have a part number for a Cupler that will join my Rotofab to a Lt5 95 mm throttlebody? I called Roto fab and they only carry a coupler for a 103 (and for $30 lol)
|
The 87mm Rotofab coupler will easily stretch over the 95mm TB. I can post a pic of mine when I get home this evening
|
Of course mine's the Magnuson supercharger version, there may be a difference vs the NA version
|
Quote:
|
My roto-fab worked with my 95mm LT5 throttle body. The coupler steps down with the stock TB but stretched fairly easily to fit the 95mm. This is with the standard LT1 setup (although mine was on an LT2 intake manifold)
|
there is no coupler because the rotofab fits over the LT5 tb just fine.
|
Mine fit over my 95 and now is on my 103 so whatever the size for the one that comes with the intake will work.
|
Tube Lube will help if you have trouble stretching it. Mine fit fine on an LT5 TB...
|
Thanks for all the replies. I didn't realize that coupler would be able to stretch that much.
|
All times are GMT -5. The time now is 12:59 AM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.