CAMARO6
Page 11 of 23 « First 78910 11 1213141521 Last »
Show 40 post(s) from this thread on one page

CAMARO6 (https://www.camaro6.com/forums/index.php)
-   2016+ Camaro: 6th Gen Camaro general forum (https://www.camaro6.com/forums/forumdisplay.php?f=155)
-   -   Revealed: Actual 2016 Chevy Camaro body side showing roofline and fender (https://www.camaro6.com/forums/showthread.php?t=396039)

Cam#7 02-17-2015 02:49 PM
A neat intro would be a commercial to show the shadows of a 2015 and 2016 in a quarter mile run. Showing how quick the 2016 SS took over the 2015 SS.

PoorMansCamaro 02-17-2015 02:56 PM
2 Attachment(s)
Here's the biggest difference between the two...

fradaj 02-17-2015 02:58 PM
Quote:
Originally Posted by maddoggyusa (Post 8239627)
I really don't know why GM doesn't show the '16 Camaro already. And quite frankly from what I've seen, it might actually help sell the Gen 5 Camaro!

I'm sure it will be nice and be a driving beast... but I'm not digging this smaller Crossfire size Camaro. It's getting close to the Pontiac Solstice size of girly cars... what's wrong with the Gen1 size where you had usable back seats?

Guestimates of the size of the Gen 6 Camaro are that it will be close to the same size of the Gen 1 Camaro. The Gen 5 Camaro is a bit bigger than the Gen 1. The green house of the Gen 6 may have less headroom though.

fradaj 02-17-2015 03:01 PM
Quote:
Originally Posted by PoorMansCamaro (Post 8239696)
Here's the biggest difference between the two...

Looks like there is a slight dogleg in the slope of the Camaro's roof line.

Wizard1183 02-17-2015 03:02 PM
Quote:
Originally Posted by dreamst8 (Post 8234287)
I just hope the key fob issue is resolved and they just do push-to-start technology!
I wouldn't be surprised if they DON'T install keyless starts on the Camaro. There's a umber of Chevrolets that have them including the vette. I'm afraid you're going to have to have it if you want a C6.:iono: After all, it is the future.

PoorMansCamaro 02-17-2015 03:17 PM
Quote:
Originally Posted by fradaj (Post 8239720)
Looks like there is a slight dogleg in the slope of the Camaro's roof line.
yes, I put the roofline and the window in the circle. the Camaro's roofline has a bend in the rear and the window shape is different.

KMPrenger 02-17-2015 04:17 PM
Quote:
Originally Posted by maddoggyusa (Post 8239627)
I really don't know why GM doesn't show the '16 Camaro already. And quite frankly from what I've seen, it might actually help sell the Gen 5 Camaro!

I'm sure it will be nice and be a driving beast... but I'm not digging this smaller Crossfire size Camaro. It's getting close to the Pontiac Solstice size of girly cars... what's wrong with the Gen1 size where you had usable back seats?
5th gen is much larger than the 1st gen.

This will bring it back in line closer to that side, but still likely larger than the 1st gen.

Not sure why you think it will be Solstice sized....that is not the case.

Look at the wheelbase the ATS has. Its actually longer than the Mustang.

spratleyea 02-17-2015 04:58 PM
1 Attachment(s)
I modified the my idea of the 2016 Camaro today but the hood needs to be lowered as in Chazcron's renderings. However I am not liking what it appears to look like. I hope the rendering is not correct. :popcorn:

2SSRS-CGM 02-17-2015 06:36 PM
They have got to use a different hood design. The vents on each side of the cowl is too mustang...

ilirg 02-17-2015 07:21 PM
Quote:
Originally Posted by 2SSRS-CGM (Post 8240262)
They have got to use a different hood design. The vents on each side of the cowl is too mustang...
although not a deal breaker, i agree, i was hoping more for some vents like on the 2014-2015s. Plus its more difficult to mod to something you like since there are now two holes in the hood where those nostrils are. Who knows at this point they might just be there to throw us off.

TLSTWIN 02-17-2015 07:27 PM
Quote:
Originally Posted by ilirg (Post 8240397)
there are now two holes in the hood where those nostrils are. Who knows at this point they might just be there to throw us off.
:pray:

MBS 02-17-2015 07:52 PM
But wait I'm confused

fradaj 02-18-2015 12:01 AM
1 Attachment(s)

Kind of reminds me of this:

fradaj 02-18-2015 12:04 AM
1 Attachment(s)
Quote:
Originally Posted by spratleyea (Post 8235854)
This render was posted late in 2014. I see some similarities in the rear. :popcorn:
After looking at some of the renders of the C6 I wonder if the front will look something like this, at least the lower part of the front valance:


All times are GMT -5. The time now is 09:08 PM.
Page 11 of 23 « First 78910 11 1213141521 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.