im kinda shocked
 

its amazing after hours of searching far a parts list to do a lt4 supercharger on a lt1 parts list cant be found
everybody just recommends adm performance but the kit they offer has no part #s
I know there is lot of people who made the upgrade I would really appreciate some help :bonk:

maybe I am wrong but I'm seeking fellow Camaro lovers who do this as a hobby. if I wanted retail help I would ask jegs or summit. forgive me if I don't bow down to the retailers who resale something that's available to the public with out a mark up. I do not come to this forum to become a retail customer.

so retailers on this forum please ignore my post I don't need you or your defenders help

What part list do you need

thanks for the reply

I would love a parts list that I can research and I don't mind searching

i had a list for the lsa swap and it was complete no offence to adm but i like to do my own work and know what i buying like part numbers

a parts list of what is needed to install the lt4 supercharger on a lt1

when people are on here promote there business it changes the flavor of the forum. they can play the role of they want to help but they really want to promote what they sell.
also the fact that they don't post part numbers is the proof.

LT4 conversion on LT1

Lt4 supercharger
All Pulleys w/ tensioner (2 mounted to water pump brackets, 2 mounted to drive side block)
Oem belt
Zl1 harmonic balancer
Intercooler pump
Zl1 heat exchanger
Zl1 Driver side aux heat exchanger
All intercooler lines
Adapter spacers for lt4 s/c
Fuel line extension
Pcv lines off zl1
Intake elbow
Evap line
Lt4 valley cover w insulator
Evap extension harness
3 bar map sensor
Maf harness
Intercooler pump relay w harness
Supercharger gasket kit
Base tune

I have more stuff such as pictures and some directions. I’m getting ready to do mine Bc old lady says so. Lmao

Hey,

I have done a TON of research on this topic. I am still no expert but ADM Performance has helped me a ton! They sent me the FULL parts list listed here:

() ADM PULLEY 2.70,2.50,2.35 -
() ADM ADAPTER PLATES -
() LT4 TENSIONER BRACKET -
() LT4 TENSIONER FOR SC -
() PULLEY SMOOTH SMALL AT WP -
() PULLEY RIBBED SMALL AT WP -
() PULLEY RIBBED LARGE AT TENS -
() DAMPNER FOR ZL1
() HOSE SC TO PUMP
() HOSE PUMP OVER FRAME TO LEFT H/E
() HOSE LEFT H/E TO CENTER H/E
() HOSE CENTER H/E TO SC INLET
() LARGE HOSE FROM LOWER RADIATOR TO RADIATOR T
() 90 DEGREE HOSE BARB FOR PASSENGER SIDE LOWER RADIATOR JOIN 3/4"
() BOLT 10MM X 100MM X 2
() BOLT 8mm x 55mm x 2
() BOLT 8MM X 40 X 3
() WASHER 8MM X 5
() WASHER 10MM X 2
() 6MM LONG BOLT X 6
() 6MM C NUT X 6
() 6MM WASHER NUT X 6
() HOSE CLAMPS X 4
() SELF DRILLER BOLT #10 X 4
() DUCT FOR INTAKE
() DAMPNER BOLT
() T MAP SENSOR AND HARNESS
() PUMP HARNESS
() EVAP EXTENSION
() VALLEY COVER
() HEAT EXCHANGER
() BRAKE BOOSTER PIPE LONG
() BRAKE BOOSTER PIPE SHORT
() HORN BRACKET
() RESIVOIR
() RESIVOIR BRACKET AND HARDWARE
() EVAP HOSE
() CLEAN AIR PIPE FROM ELBOW TO CATCH CAN
() PUMP FOR INTERCOOLER
() PUMP BRACKET
() PUMP SCREWS X 2 6MM
() 2.38" K080830
() 2.50" K080839
() 2.70" K080842 HD
() 2.90" K080855

I really don't understand your logic.

You say you like to do your own research, yet your asking for someone else to provide you the list with part numbers.

ADM and WeaponX have done all the hard work, researching test fitting and confirming fitment of what is needed, so why don't they deserve the opportunity to make a little profit to keep their doors open.

Then you want to flame them for doing all the work for you and not giving you a free list.

You can simply pick up the phone Call ADM or WeaponX and order everything you need 1 stop shopping.

When you get the parts I am sure they will have part numbers on them so you know what you're buying.

It is very rare I will get involved in a conversation like this but your posts have me Shaking my Head in disbelief.:facepalm:

Ted.

Amen Ted. I am in the parts business and see this stuff all the time. It gets so very frustrating. I dont understand why it is immoral for a company to offer FREE unobligated information to the masses and then also hope that that leads to them making money to put food on the table. Imagine the nerve of some folk.

It is rare but we get it here too.

Someone calls or emails, Hey can you give the part number i need so I can go buy it somewhere else for the lowest price.

The guy that has the lowest price doesn't know what I need.

There logic, I expect you to do all the work finding what I need for free, so I can shop the lowest price.

Me the part number is on the part when you purchase it from us and will be on your receipt.

They get mad.

Unbelievable.

Ted.

Man, I love that response, I think I will borrow that. Of coarse their response is probably going to be "So your not going to give me the part number" then I will say "No" and then they will ask to speak with the GM. Ask me how I know this routine.:mad2: Then the GM will tell us to give the info out.

The really frustrating thing is we are pure commission. We have no guarantee or hourly wage, so we get zippo for giving out free information all day. And it happens ALOT here. And people think they are entitled to it. Ok, vent complete. :D