CAMARO6

CAMARO6 (https://www.camaro6.com/forums/index.php)
-   2016+ Camaro: 6th Gen Camaro general forum (https://www.camaro6.com/forums/forumdisplay.php?f=155)
-   -   What did you do to your 6th Gen Camaro today?! (https://www.camaro6.com/forums/showthread.php?t=436559)

Zapote21 03-26-2024 03:49 PM

1 Attachment(s)
Drove the Dragon on Monday!

Dirtbike 03-26-2024 10:54 PM

3 Attachment(s)
Installed:
-Hurst shifter
-Speeddawg 1LE shift knob
-JXB driveshaft bearing support

Curr 03-27-2024 03:10 PM

How do you like it compared to the stock short throw?

Dirtbike 03-27-2024 10:02 PM

Quote:

Originally Posted by Curr (Post 11414426)
How do you like it compared to the stock short throw?

I'll have to put some miles on it to give a true opinion, but I really like it so far.

JamesNoBrakes 03-27-2024 11:15 PM

1 Attachment(s)
Preparing for AutoX season

sklippi2018 03-29-2024 03:09 PM

2 Attachment(s)
Installed K&N CAI! :happyanim: 5HP increase in looks alone! HA!

Noticed coolant was low so that'll be done shortly.:eyebulge:

RayKinStL 03-29-2024 03:46 PM

Got IGLA installed. Can finally sleep a bit easier at night.

keep_hope_alive 03-29-2024 04:43 PM

https://hosting.photobucket.com/imag...329_130616.jpg

Parked it in my garage for the first time in 8 weeks! New engine, new fuel pump, and oddly, a new driver's window motor. It really needs a cleaning tho, they didn't try to tidy up the engine bay, at all.

FactoryMatt 03-29-2024 05:02 PM

Got rid of the useless 2SS wireless charger

https://i.imgur.com/uy8o9jq.jpeg

https://i.imgur.com/dUMlqZV.jpeg

Whoomba 03-29-2024 05:32 PM

Quote:

Originally Posted by FactoryMatt (Post 11414967)
Got rid of the useless 2SS wireless charger

https://i.imgur.com/uy8o9jq.jpeg

https://i.imgur.com/dUMlqZV.jpeg

That engineer should be fired. I cut those two tabs off and my iPhone 14 works.

Curr 03-30-2024 07:15 AM

Quote:

Originally Posted by FactoryMatt (Post 11414967)
Got rid of the useless 2SS wireless charger

Where did you get that? How easy does that come out?

arpad_m 03-30-2024 07:48 AM

Quote:

Originally Posted by Curr (Post 11415050)
Where did you get that? How easy does that come out?

It's the ultra cheap plastic cubby from the LT / 1SS :sm0:
https://www.gmpartsdirect.com/oem-pa...panel-84004284

FactoryMatt 03-30-2024 08:09 AM

Quote:

Originally Posted by Curr (Post 11415050)
Where did you get that? How easy does that come out?

eBay. "Rear console" or storage cubby.

There are YouTube videos and threads here that show. Three bolts on each side tilt the console up , two Phillips screws on the inside. Hardest part is getting the rear seat cushion out of the clips.

arpad_m 03-30-2024 10:37 AM

Received and assembled this water deionizer for the Camaro, hoping to never again have to touch it with drying towels after a wash :)

We'll see how well it works, TDS here is in the low 100s, so water from the hose must not be left on the car for more than a few minutes.


All times are GMT -5. The time now is 02:13 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.