CAMARO6 - R1 CONCEPTS| CARBON ALLOY GEOMET ROTORS & R1 AND HAWK BRAKE PADS!

R1 Concepts- Carbon Alloy Geomet Rotors!
We're happy to introduce to you all our new Carbon Alloy Geomet rotors! Manufactured for European and heavy vehicles, our High Carbon iron formulations enhances noise dampening characteristics, while providing high strength, and increased thermal conductivity compared to standard discs, which increases durability.

Each rotor is engineered to match the OE vane configuration, including OE split-core technology to ensure proper and maximum heat dissipation. Additionally, all cores are dipped with specifically formulated paint in order to provide a smoother finish inside the vane structure. The smooth finish will improve air flow as well as reduce the amount of machining required in order to properly balance the finished rotor during the mill-balancing process.

GEOMET Finish- The Superior Corrosion
We apply a genuine GEOMET finish throughout the entire part, which promises to deliver superior corrosion protection. The GEOMET coating is processed dry, shipped dry, and ready to install without any additional preparation. Without the need to clean an oil covered rotor, this saves a tremendous amount of time and money during the installation process.

-Superior Corrosion Protection- Provides excellent cyclic corrosion performance when tested according to automotive manufacture's test methods incorporation heat, salt spray (withstands 400 hours), and humidity (SAE J2334, GMW 14872, Ford CEPT: 00.00-L-467, Asian CCT)

-Environmentally Friendly: Meets the following regulations: Environmental Protection Agency (EPA), Chrysler CS-9003, General Motor GMW 3059, Ford WSS-MP99P9999-A1 (HEX 9), the EU Directives on End of Life Vehicles (ELV) and Electrical Equipment (RoHS)

https://image.ibb.co/cXyXSv/geomet_c...loy_rotors.gif

2016-2018 Camaro (LT, LS; 2.0L & 3.6L w/ Single Piston Front Calipers)
FT/RR CARBON ALLOY OEM REPLACEMENT GEOMET ROTORS: $220 SHIPPED

FT/RR CARBON ALLOY SLOTTED GEOMET ROTORS: $230 SHIPPED

FT/RR CARBON ALLOY DRILLED & SLOTTED GEOMET ROTORS: $245 SHIPPED

2016-2019 Camaro (LT, LS 2.0L; 4 Piston Brembo Front Calipers- Slotted Only)
FT/RR CARBON ALLOY SLOTTED GEOMET ROTORS: PM FOR PRICING

2016 Camaro (LT 3.6L V6; 4 Piston Brembo Front Calipers)
FT/RR CARBON ALLOY SLOTTED GEOMET ROTORS: $250 SHIPPED

FT/RR CARBON ALLOY DRILLED & SLOTTED GEOMET ROTORS: $270 SHIPPED

2017-2019 Camaro (LT, LS 3.6L V6; 4 Piston Brembo Front Calipers)
FT/RR CARBON ALLOY OEM REPLACEMENT GEOMET ROTORS: $255 SHIPPED

FT/RR CARBON ALLOY SLOTTED GEOMET ROTORS: $295 SHIPPED

FT/RR CARBON ALLOY DRILLED & SLOTTED GEOMET ROTORS: $325 SHIPPED

2016-2018 Camaro (SS 6.2L V8 4 Piston Front Calipers)
FT/RR CARBON ALLOY SLOTTED GEOMET ROTORS: $275 SHIPPED

FT/RR CARBON ALLOY DRILLED & SLOTTED GEOMET ROTORS: $305 SHIPPED

2017-2019 Camaro (SS 6.2L V8 Brembo 6 Piston Front Calipers)
FRONT 2-PIECE OEM REPLACEMENT ROTORS: $1,025 SHIPPED

FRONT 2-PIECE SLOTTED ROTORS: $1,100 SHIPPED

FRONT 2-PIECE DRILLED & SLOTTED ROTORS: $1,120 SHIPPED

PADS
R1 OPTIMUM OEp PADS (vehicle specific)
R1 PREMIUM CERAMIC PADS
R1 PERFORMANCE SPORT BRAKE PADS

CONTACT INFORMATION
KEVIN C.
EMAIL: KEVIN@R1CONCEPTS.COM
PHONE: 888-712-6623 EXT. 7022