CAMARO6 - Part number for Flowmaster 10's?

CAMARO6 (https://www.camaro6.com/forums/index.php)

- V8 LT1 Engine, Exhaust, and Bolt-Ons (https://www.camaro6.com/forums/forumdisplay.php?f=231)

- - Part number for Flowmaster 10's? (https://www.camaro6.com/forums/showthread.php?t=576498)

sworn

06-03-2020 06:07 PM

Part number for Flowmaster 10's?

1 Attachment(s)

I'm embarrassed to say I forgot the part number for Flowmaster 10's Mufflers. I had a very similar setup like that pictured below on my old Camaro. Want to do the same exhaust on my new 2019. Thanks!

https://www.camaro6.com/forums/attac...1&d=1591225419

z28pat

06-03-2020 06:20 PM

Is that setup flow master mufflers replacing the oem suitcase but keeping the rest of the npp? How did it sound and did the npp make a difference in the different modes ?

sworn

06-03-2020 10:10 PM

Quote:

Originally Posted by z28pat (Post 10803599)

Is that setup flow master mufflers replacing the oem suitcase but keeping the rest of the npp? How did it sound and did the npp make a difference in the different modes ?

Yes, that's exactly what it is. Didn't notice any difference in sound via NPP modes.

I liked the sound, but than again I like it on the louder side.

njweatherman

06-04-2020 09:05 AM

See this link:
https://www.holley.com/products/exha...per_10_series/

sworn

06-04-2020 09:22 AM

Hmmm, think it may be this one. Not sure though.

https://www.holley.com/products/exha.../parts/8430152

sworn

06-04-2020 09:25 AM

Is the stock exhaust 2.50 or 3?

BlackbeastSS2

06-04-2020 09:27 AM

Quote:

Originally Posted by sworn (Post 10803970)

Is the stock exhaust 2.50 or 3?

2.75 pipes

njweatherman

06-04-2020 10:35 AM

Go to the exhaust shop. They will look at your current set-up and then tell you which super 10 series muffler to order. Bring that photo too.

enzia35

06-04-2020 10:50 AM

Now would the sound change opening/closing the valves on a rigged NPP setup like that?

MackSteelPrivateEye

06-04-2020 02:22 PM

Quote:

Originally Posted by sworn (Post 10803590)

That's so embarrasing when that happens.:facepalm::sm0:

sav03cobra

06-05-2020 12:34 PM

This is what you’re looking for:

FLO-8430152
Muffler, Super 10 Series, 3.0 in. Inlet/Dual 2.5 in. Outlets, Stainless Steel, Black, Each
(Mfr. #: 8430152)

BlackbeastSS2

06-05-2020 02:29 PM

4 Attachment(s)

Attachment 1034327

Quote:

Originally Posted by sav03cobra (Post 10804806)

This is what you’re looking for:

FLO-8430152
Muffler, Super 10 Series, 3.0 in. Inlet/Dual 2.5 in. Outlets, Stainless Steel, Black, Each
(Mfr. #: 8430152)

Why would you want your flow restricted to 2.5? Just go with the 3.0 in and out. Plus you will also have to decide do you want the pipes offset or straight because of muffler choice? Depends on your build. Mind you I went with 3.0 inch custom pipes after getting rid of the crunch pipes to the tips. I would rather go 2.75 to 3.0 then go from 2.75 to 2.5.

sworn

06-06-2020 02:23 PM

Quote:

Originally Posted by BlackbeastSS2 (Post 10804879)

Attachment 1034327

Why would you want your flow restricted to 2.5? Just go with the 3.0 in and out. Plus you will also have to decide do you want the pipes offset or straight because of muffler choice? Depends on your build. Mind you I went with 3.0 inch custom pipes after getting rid of the crunch pipes to the tips. I would rather go 2.75 to 3.0 then go from 2.75 to 2.5.

I'm open to idea's. Do you have any more pics of your exhaust setup? Thanks!

All times are GMT -5. The time now is 07:49 PM.