Removed Passenger seat, airbag light now
SOLVED
Dealership had to replace air bag wiring plug on bottom side of seat on passenger seat. Hello, I know I should have disconnected battery first, but I did not. I removed passenger seat on my 2019 Camaro SS. I installed Katzkin leather seat covers after removing the original fabric. I carefully installed back in car, connected the little airbag plug on the side of the seat and the main harness under the seat. Now when I start the car, airbag light stays on. I currently have disconnected the battery, and I am waiting 30 minutes. I will then connect again. In the meantime, I will disconnect main seat harness and airbag connecter and re connect. Any other ideas? Not sure if this will work. Do I need to go to the dealer to reset this, or could something possibly be more wrong? I have the torque pro app to reset engine codes, but it does not seem to have anything for the SRS resetting. HELP! |
Well, it ended up being the airbag wiring harness plug on the passenger side seat where it plugs in by the track. Problem solved.
|
All times are GMT -5. The time now is 07:56 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.