Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Canada (https://www.camaro5.com/forums/forumdisplay.php?f=21)
-   -   Spring Installs. (https://www.camaro5.com/forums/showthread.php?t=456255)

BradfordCamaro 06-13-2016 01:42 PM

Spring Installs.
 
Hi guys.
Thought I would ask here. More users with experience with local shops.
Just looking for a place around the GTA that would be good to bring my car to get a set of springs installed.
Someone that knows what they are doing.
I know there are Tuner shops around but I think their expertise is more along the lines of Imports.

Any thoughts or suggestions would be appreciated.

Thanks guys.

1meanls3 06-14-2016 06:19 AM

DaSilva motorsports did my spring install and they did a great job installing them

BradfordCamaro 06-14-2016 07:40 AM

I did contact them. Not sure on pricing. 6th Gen install is different, I have to talk to them again and confirm if pricing was based on earlier Gen installs.
Rear is just a spring. 3 bolts, lower the control arm and swap the spring.
Thanks for the reply.

stratman2SSRS 06-14-2016 08:19 AM

They are super easy to do yourself if you have a jack and some jackstands.
Then get an alignment done.
I'm sure there are DIY videos on youtube you can watch.
Or check the DIY section on this forum.
I didn't even need a spring compressor.
Or call SPi:thumbsup:

DINGO 06-14-2016 10:34 AM

http://www.spituning.com/

given them a call. They will take great care of you.

TJ91 06-15-2016 02:44 PM

Do it yourself dude


All times are GMT -5. The time now is 08:23 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.