Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com (https://www.camaro5.com/forums/index.php)
-   Cosmetics and Lighting Modification Discussions (https://www.camaro5.com/forums/forumdisplay.php?f=37)
-   -   10-13 SS/RS (12-15 ZL1) Full HID projector Upgrade (https://www.camaro5.com/forums/showthread.php?t=616186)

Leo72793 05-13-2023 04:18 PM
10-13 SS/RS (12-15 ZL1) Full HID projector Upgrade
 
8 Attachment(s)
Good evening all! Here is a full write up for the 2010-2013 Camaro SS/RS and 2012-2015 ZL1. Hopefully yall enjoy having brighter headlights!

There is a Download of the instructions attached as well.

SummitWhite11 05-13-2023 04:37 PM
Quote:
Originally Posted by Leo72793 (Post 11316150)
Good evening all! Here is a full write up for the 2010-2013 Camaro SS/RS and 2012-2015 ZL1. Hopefully yall enjoy having brighter headlights!

There is a Download of the instructions attached as well.

Thanks for posting. Looks like the last pic link is broken? It will not show.


Sent from my iPhone using Tapatalk

camguynj 05-13-2023 07:36 PM
Quote:
Originally Posted by SummitWhite11 (Post 11316158)
Thanks for posting. Looks like the last pic link is broken? It will not show.


Sent from my iPhone using Tapatalk
If you mean the pdf link it works for me

SummitWhite11 05-13-2023 07:51 PM
Quote:
Originally Posted by camguynj (Post 11316200)
If you mean the pdf link it works for me

Yes it looks like Tapatalk is preventing the link from working. Needs to be used in an actual browser.


Sent from my iPhone using Tapatalk

Leo72793 05-13-2023 08:11 PM
Quote:
Originally Posted by camguynj (Post 11316200)
If you mean the pdf link it works for me
Yerp. Thats one reason i just use the web version now. Taptalk disabled attachments a while ago

camguynj 05-16-2023 09:29 AM
Quote:
Originally Posted by Leo72793 (Post 11316150)
Good evening all! Here is a full write up for the 2010-2013 Camaro SS/RS and 2012-2015 ZL1. Hopefully yall enjoy having brighter headlights!

There is a Download of the instructions attached as well.
Hiw was the light pattern (ie. did have to make any horizontal adjustment) ? Did you use the eom shutter?

Leo72793 05-16-2023 07:10 PM
Quote:
Originally Posted by camguynj (Post 11317070)
Hiw was the light pattern (ie. did have to make any horizontal adjustment) ? Did you use the eom shutter?
wont know until i get the car back. the oem shutter? do you mean the high beam?

camguynj 05-16-2023 09:43 PM
Quote:
Originally Posted by Leo72793 (Post 11317330)
wont know until i get the car back. the oem shutter? do you mean the high beam?
Yes, the high beam solenoid shutter mentioned in the instructions as Optional

Leo72793 05-17-2023 04:43 AM
Quote:
Originally Posted by camguynj (Post 11317399)
Yes, the high beam solenoid shutter mentioned in the instructions as Optional
I snipped my wire off the oem one, soldered it to the new one. you cant keep the oem high beam solenoid. you have to use the new one. i just chose to cut and solder vs hardwire.

camguynj 05-17-2023 10:51 PM
Quote:
Originally Posted by Leo72793 (Post 11317438)
I snipped my wire off the oem one, soldered it to the new one. you cant keep the oem high beam solenoid. you have to use the new one. i just chose to cut and solder vs hardwire.
Do you mean the Morimito solenoid wire connector is not compatible with the eom wire harness so you have to replace the connector with the eom connector ?

Leo72793 05-18-2023 06:33 PM
Quote:
Originally Posted by camguynj (Post 11317679)
Do you mean the Morimito solenoid wire connector is not compatible with the eom wire harness so you have to replace the connector with the eom connector ?
Yes? i think i read that right. thats my optional step. some may choose to do something else. i cut the OEM connector off and spliced it into the new high beam solenoid (after cutting the non oem connector off)

camguynj 05-18-2023 07:57 PM
Quote:
Originally Posted by Leo72793 (Post 11317965)
Yes? i think i read that right. thats my optional step. some may choose to do something else. i cut the OEM connector off and spliced it into the new high beam solenoid (after cutting the non oem connector off)
Thanks for clarifying. Guess it would have been expecting too much to have the connector be plug compatible

Leo72793 05-20-2023 07:20 PM
Polished up my headlights today after a light sanding at 2500 grit. Cant wait to put these things in.

SummitWhite11 05-23-2023 07:31 PM
Quote:
Originally Posted by Leo72793 (Post 11318508)
Polished up my headlights today after a light sanding at 2500 grit. Cant wait to put these things in.

Show us the finished product when you are done with everything. I have yet to order my Morimoto components yet.


All times are GMT -5. The time now is 12:43 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.