► APEX | Flow Formed Lightweight Camaro Wheels - Built to Perform
Questions? Call: 925-245-0773 Email: expert@apexwheels.com Web: http://www.apexwheels.com?utm_source...content=thread Hours: M-F 9a-5p PST https://live.staticflickr.com/65535/...091f8790_c.jpg APEX Flow Formed Wheels Over the last few years, APEX has been a great solution for Camaro enthusiasts looking for the perfect balance between strength, weight, and cost. Our ARC-8 design addresses the concerns of more and more racers and track day enthusiasts: long term durability, fitment, and performance. Our newer SM-10 design (coming soon!) provides a step-up in strength and true race wheel features like I-beam spokes and reinforced inner lip. ➡︎ Perfect fit ➡︎ Made to work with big brake kits ➡︎ 100% OEM compatibility, no extra hardware required ➡︎ Unbeatable warranty & 50% replacement program Order Now Designs & Finishes ARC-8 - 19" https://live.staticflickr.com/65535/...d7790bb90a.jpg ARC-8: The lightest wheel design we make. Also the most affordable. A deep lug recess allows for an open center for quick wheel changes. Offered in Profile 3, the deep concave profile reduces weight and creates a stunningly aggressive appearance on low offset and wide width applications. Available in 19” diameters. SM-10 - 18"& 19" https://live.staticflickr.com/65535/...e1573b30_o.png SM-10: Modern design with reinforced lips and I-beam spokes. The SM-10 spokes were designed to be robust where they need to be, and extra lightweight where they should be. Weight is reduced by CNC machining material out from the sides of each spoke. Fit Matters https://live.staticflickr.com/3800/2...ddd083fc_c.jpg The right solution for every application. An optimized car setup begins with the perfect wheel and tire fitment. Without model-specific attention to each wheels specifications, maximum performance is compromised. Each size was selected to find the right balance between a clean fit and the most grip possible. Each wheel combines many great features to meet the different brake caliper, strut, and fender clearance needs of modern Camaros. No need to change your wheel bolts, center caps, or TPMS sensors. All APEX Camaro wheels were designed from the start to work with OEM 60º tapered hardware, which means both OEM lug nuts and aftermarket stud kits with the proper lug nut seat type will fit perfectly. All of our Camaro wheels use a 67.1mm center bore, no hubcentric rings or adapters are necessary. All wheels come with gloss black APEX center caps, but you can also snap-in OEM 6th Gen caps for a more OEM+ look. All APEX wheels accept OEM and aftermarket equivalent TPMS sensors, and any standard-sized metal or rubber valve stem. A lot of room in a tight space. Spoke clearance is only half the problem. The barrel construction on a wheel also needs to be big enough to clear the sides of your caliper and rotor. Many aftermarket wheels that have aesthetic compromises in their design may work with smaller stock brakes, or smaller diameter big brake kits, but the larger kits will pose a major problem. The barrel of the ARC-8 wheel offers unmatched caliper clearance because wheels shouldn’t limit your choice of aftermarket brake kits, and brake kits shouldn’t force you to run oversized wheels. We 2D modeled most Big Brake Kits available in Solidworks and tweaked the wheel design of the ARC-8 prior to production in order to fit as many kits as possible, including ZL1 and Z/28 setups. We conducted extensive Finite Element Analysis to reinforce high-stress areas and to remove material where it didn’t improve strength. The end result is a flow formed wheel with an ideal balance of strength and weight. True VIA - JWL & Beyond https://live.staticflickr.com/65535/...295f88db_w.jpg https://live.staticflickr.com/65535/...a2a3727c_w.jpg Many companies promote their wheels as being certified by the VIA when they actually aren’t. That’s like using the USDA logo on food without permission. APEX wheels get officially tested and registered by the VIA in Japan, and we have the proof to back it up. Japan’s JWL is a standard for wheel load ratings. Our wheels exceed those ratings. Most manufacturers only meet the minimum, while some even fall below—yet they still claim to be JWL. Always verify load ratings before you buy. Additional Features https://live.staticflickr.com/65535/...fcf17a29_q.jpg https://live.staticflickr.com/65535/...84282002_q.jpg https://live.staticflickr.com/65535/...ba78e629_q.jpg https://live.staticflickr.com/65535/...b789be54_q.jpg Hub Centric - All APEX Camaro wheels with a 5x120mm bolt pattern are purpose built featuring a 67.1mm center bore. No centering rings required. Center Caps - We don't charge extra for caps and we design our Camaro wheels to be interchangeable with the OE 6th Gen cap for enthusiasts seeking a clean factory look. All wheels come with our gloss Black APEX caps included. We also offer optional gloss red or gloss blue APEX caps. OEM Hardware - APEX wheels can be used with all OEM mounting hardware, proper aftermarket hardware and wheel spacers. TPMS - All APEX wheels accept OEM and aftermarket Tire Pressure Monitoring Sensors and standard fit valve stems. If your vehicle isn’t equipped with sensors or you choose to bypass them for your track/race car, then select from our metal stems available in multiple finishes. All our wheels come with a lifetime structural warranty and 1 year finish warranty, so you can be confident in your purchase. Let’s face it: Whether you are a weekend warrior practicing at the track, a club racer pushing the limit for a podium finish, or your daily commute involves crater-ridden minefields known as city roads, mistakes happen and parts will be damaged along the way. We are not really a performance company if we sell wheels in a way that penalizes the pursuit of driving at the limit. For this reason, we stepped up and created a program to significantly reduce the costs of properly maintaining a set of wheels by making replacements extremely affordable. Our unique APEX Wheel Replacement Program offers eligible customers replacement wheels at 50% off our standard prices. We know what fits. From direct bolt-on to all-out race fitments and everything in between. We've street and track tested extensively to save you the trial-and-error. View our fitment guides. APEX Flow Formed Wheel Gallery https://live.staticflickr.com/65535/...91f26a41_c.jpg Order Now Questions? Call: 925-245-0773 Email: expert@apexwheels.com Web: www.apexwheels.com Hours: M-F 9a-5p PST |
What is the latest ETA on ARC8's for the ZL1/1LE in 19x11 and 19x12?
|
When the group buy happened i was told july-august.
|
Quote:
- Cory |
Is it too late to get in on the group buy? I'm super interested, thanks!
|
Just spoke with Cory @ Apex... Excellent conversation and I look forward to getting a set when they are available. (Not to far off)
|
Quote:
TIA! |
Quote:
|
They told me second week of October a couple of weeks ago for the 19x12s
|
Quote:
|
Didn’t get the wheels in time for yet again another weekend but.. I did get an email saying my set of wheels will ship 10/10! Yay me
|
Quote:
|
Exciting Announcement for Camaro owners! By popular demand, the ARC-8 is now available in Satin Bronze. In stock now in 19x10" ET20 with more sizes coming mid-summer.
https://live.staticflickr.com/65535/...d5bf5eba_h.jpg https://live.staticflickr.com/65535/...098819a0_h.jpg - Cory |
Any updates on the matte bronze availability in other sizes? Mostly interested in the direct fit 19x11 et43. I'd pick up the fronts now if I knew the rears would be available within the next month or so.
|
All times are GMT -5. The time now is 09:43 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.