Launch control on A10 ZL1
Has anyone played with the launch control? I usually launch from idle but a friend suggested setting launch control to 2400. I just wonder if I would get too much spin. I already get too much spin since I don’t have any DR’s yet
|
2400 will not work with the stock tires. You'll likely want around 1200 and 12% slip, but you just have to play with it, because it will vary with the amount of grip you are getting.
|
Thanks
|
Launch control sucks with the SS, no additional setting like the ZL1 has. I spun my ass off the other night testing it. Can't find a setting for RPM and I have no clue what the default is.
|
my 19 2ss has custom settings.. i can set the rpm and slip %
|
Quote:
That is an updated feature for the 19's. the 16-18 models dont have any user options for launch control. |
Quote:
All nannies off in Track mode 11.4-5. Same day and DA. Also the ZL1 Line lock is pretty much useless. With the right brake/throttle touch you can wear down to the tread bars if you want in one sitting. Using the ZL1 LL is just too cumbersome to use for the burnout. |
FWIW the 2019 custom launch control wasn't much use to me either last night. I tried it from 3000-4000RPM (M6) and all I managed to accomplish was coming off the line sideways and horrendous 2.5+ 60' times...
Need more practice but I think just an aggresive slip off the line without LC and all nannies off (I was running in Track/PTM Race instead of full off) is the ticket next time. |
The launch control goes up to 2400 which is what I used. I hooked good on street radials with a 1.7 60’ no mods. 7.5 1/8 mile. I use the line lock with no problem
|
Quote:
Person who replied has a 2SS, the SS models didnt get the ZL1's LC until the new facelift came out. The ZL1's had the LC since they came out in 2017. |
All times are GMT -5. The time now is 03:11 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.