2.9 Whipple ZL1 Build & F1A-94 Procharged ZL1 | Race Proven Motorsports
 

We have two ZL1's in this month ditching the stock supercharger.

https://c1.staticflickr.com/5/4820/4...bac84998_b.jpg

https://c1.staticflickr.com/5/4892/3...8de75161_b.jpg

The first ZL1 is a Manual 2017 we previously worked on and max'ed the stock blower out at 792whp & 853 tq. (Meth, 50%E and 16lbs of boost) The customer enjoyed it for about 6-8 months and now wants more so this one is getting an F1A-94 Procharger.

Ported Blower
Ported Heads
ARH 2" headers with catless x-pipe
RPM Custom Cam Package
RPM Fuel System w/flex fuel
RPM Meth System
Bora Atak NPP Exhaust

https://c1.staticflickr.com/5/4850/4...d2a86bce_b.jpg




The second is a Auto 2018, came to us bone stock and baselined.

https://c1.staticflickr.com/5/4854/4...ffcfedee_b.jpg

Out with the old stock blower
https://c2.staticflickr.com/2/1912/4...c0f88f1b_b.jpg

https://c2.staticflickr.com/2/1970/4...2da521b1_b.jpg

https://c1.staticflickr.com/5/4873/4...563bc05c_b.jpg

Installed LS7 lifters, Katech Valley cover and BTR daul valve spring kit with our custom cam package.
https://c1.staticflickr.com/5/4852/4...99113959_b.jpg

https://c1.staticflickr.com/5/4891/4...86c94743_b.jpg

New ARH 2" headers are on along with the Whipple supercharger and katech valve covers, it will receive our RPM inserts as well.
https://c1.staticflickr.com/5/4916/4...23a424a2_b.jpg

https://c1.staticflickr.com/5/4833/4...9bbae408_b.jpg

https://c1.staticflickr.com/5/4827/4...a47b9f80_b.jpg

Finishing up the fuel system and Meth now will update with some pictures on the next post.


The F1A-94 Procharged ZL1 (since we already did the fuel system and meth on this car installation was much quicker)

https://c1.staticflickr.com/5/4896/4...0220414b_b.jpg

https://c1.staticflickr.com/5/4847/4...3b793939_b.jpg

https://c1.staticflickr.com/5/4872/4...4fa8290e_b.jpg

https://c1.staticflickr.com/5/4846/4...6f609cb8_b.jpg

https://c1.staticflickr.com/5/4840/4...7a790c50_b.jpg

https://c1.staticflickr.com/5/4895/4...340ebbef_b.jpg


Video of both going together on our webseries, they will be hitting the dyno soon as well so stay tuned. :thumb:

https://www.youtube.com/watch?v=ZxB2PGw8nzs

https://www.youtube.com/watch?v=X3x5hZJejUQ

Sick, keep up the good work. I watch every episode on YouTube.

Impressive!!!

I spend way too much time watching you guys in youtube

Steve kills it with these shots/edits man.

Some seriously bad ass cars.

What kind of fueling mods did you all do if you don't mind me asking?

Looks amazing! Just a matter of time........I'm in major trouble now. See you guys soon!

Can't wait to see the results....:popcorn:

Meth system

https://c1.staticflickr.com/5/4867/4...7f03f439_b.jpg

https://c1.staticflickr.com/5/4883/4...292d8803_b.jpg

https://c1.staticflickr.com/5/4806/4...a4f955d7_b.jpg

We use dual nozzle this is just one side.
https://c1.staticflickr.com/5/4894/4...0be4c4ec_b.jpg


All finished up and going on the dyno in Today's Episode
https://c1.staticflickr.com/5/4865/4...083b921f_b.jpg

https://c1.staticflickr.com/5/4854/4...24bd231e_b.jpg

https://c1.staticflickr.com/5/4893/4...5580263a_b.jpg

https://c1.staticflickr.com/5/4898/3...e06a34e5_b.jpg

https://c1.staticflickr.com/5/4822/4...7485c1c2_b.jpg

https://c1.staticflickr.com/5/4907/3...e29021c7_b.jpg

https://c1.staticflickr.com/5/4845/4...bd6ba57a_b.jpg

I can't wait to bring my car back...almost done saving!!!!!!!

We'll be here!

Today's Episode

https://www.youtube.com/watch?v=ZS-EqMQWrMQ


https://c1.staticflickr.com/5/4882/4...06a288b2_b.jpg

I see you guys didn’t pull the motor for the Whipple ZL1 cam install.

You guys running the stock timing chain on that build?

Cars look great!!

Why would we pull the engine? No we replace everything when we do a cam.

what was this car on just 93..

Also heads, cam, and 103mm TB I assume?