CAMARO6 - Roto-Fab CAI on an LT5 95mm throttle body

CAMARO6 (https://www.camaro6.com/forums/index.php)

- ZL1 Discussions (https://www.camaro6.com/forums/forumdisplay.php?f=235)

- - Roto-Fab CAI on an LT5 95mm throttle body (https://www.camaro6.com/forums/showthread.php?t=603105)

MakCamaro

03-08-2022 04:02 PM

Roto-Fab CAI on an LT5 95mm throttle body

I am planning to fit the Roto-Fab CAI and an LT5 95mm throttle body on my ZL1. Will the step hose included with the Roto-Fab slide over the 95mm throttle body or will I need a coupler?

LT4Greg

03-08-2022 05:45 PM

Send an email to RotoFab and ask your question to them. I’m sure someone there will reply to your email.

Stephen12ZL1

03-08-2022 06:39 PM

the stock elbow end will stretch over the LT5 95mm opening if that helps...not much effort either

appleman22

03-08-2022 08:05 PM

yes it fits no problem, just did this

MakCamaro

03-09-2022 01:50 AM

Thank you for your replies guys. It seems to be an easy job!

All times are GMT -5. The time now is 09:35 AM.