CAMARO6

CAMARO6 (https://www.camaro6.com/forums/index.php)
-   Forced Induction Discussions (https://www.camaro6.com/forums/forumdisplay.php?f=236)
-   -   How bout 8.72@156 w/Heartbreaker Maggie (https://www.camaro6.com/forums/showthread.php?t=563594)

laynlo15 10-13-2019 02:46 PM

How bout 8.72@156 w/Heartbreaker Maggie
 
Swanson just laid one down at Vega's and DA is about 3300 and temps are warm. He's not done yet so wait till he gets back to Sea Level in Cali, hold on baby its gonna be fast. Don't think he has that port injection everyone thinks is necessary, nope. Just the good old nozzle that seems to work pretty darn good.

gotswap 10-13-2019 04:05 PM

Does not having port injection have anything to do with his time?

laynlo15 10-13-2019 04:33 PM

Just saying that everyone thinks they have to run port injection to go fast. I'm saying its not needed to go fast. I've listened to some trash Magnuson Superchargers because we didn't do port injection and glad we didn't as we go our own way. I think there was a song about that, auh Fleetwood Mac did it. I'm not saying you have so thanks. Just smiling.

gotswap 10-13-2019 04:47 PM

hahahah, I see what you did there. I don't think anyone is saying you need to go port injection to go fast. For me, it is all about being able to fill up at any local gas station and not having to worry about the E content. That and the fact that port inject will keep the valves nice and clean.

Honestly, I would be shocked if Magnuson ever did port injection. There is no room for it.

laynlo15 10-13-2019 04:51 PM

Cool. Its all good. Your a gentleman, some aren't. Haha

laynlo15 10-13-2019 05:03 PM

By the way to can tune our 2650 to pull into any gas station.

KingLT1 10-13-2019 05:55 PM

Quote:

Originally Posted by gotswap (Post 10639584)
hahahah, I see what you did there. I don't think anyone is saying you need to go port injection to go fast. For me, it is all about being able to fill up at any local gas station and not having to worry about the E content. That and the fact that port inject will keep the valves nice and clean.

Honestly, I would be shocked if Magnuson ever did port injection. There is no room for it.

meth injection will clean the valves just like port injection.

laynlo15 10-13-2019 06:06 PM

I don't think it really matters if we do or not, but we don't really give out what we are working on and won't till it hits the market. Vet? Nope. Camaro?

ShizzySupra 10-13-2019 08:45 PM

So the 2.3 went faster than any other PD blower and almost faster than big boy centris...

He could have pushed that further but slapped a 2650 and goes a tenth quicker at worse air?

Go ahead, say something negative 🤣🤣🤣

laynlo15 10-13-2019 08:58 PM

Actually a tenth and a half, 8.87 down to a 8.72. I don't remember what the DA and Temps were at Famoso but for sure not 80 degrees and 3900 DA since he was basically at sea level in Cali. Shizzy I know your wanting to roll out to the track soon to try out that 990 rwhp you just put down with the 2300r. Go get it.

7WSM 10-14-2019 11:42 AM

But if you roll race you will need port injection....

parish8 10-14-2019 12:01 PM

Quote:

Originally Posted by ShizzySupra (Post 10639716)
So the 2.3 went faster than any other PD blower and almost faster than big boy centris...

He could have pushed that further but slapped a 2650 and goes a tenth quicker at worse air?

Go ahead, say something negative 🤣🤣🤣

You guys seem a little sensitive. Those are some crazy fast times however you get there.

I think if anyone was to give you/us shit it would be the mustang guys. There are a few of those guys going crazy fast without 1/2 the shit we have to do.

gotswap 10-14-2019 12:29 PM

Because they have port injection!!!!!

See what I did there :)

I just helped a buddy slap a Roush 2650 on his 18 GT, damn thing pulls pretty nice

Choda 10-14-2019 01:08 PM

very very impressive


All times are GMT -5. The time now is 10:39 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.