Anvil Rear Notch Spoiler 6th Gen Test Fit!
3 Attachment(s)
Hi Camaro6 Members,
Anvil Auto is looking for a local 6th Gen Camaro Owner to bring their car to our office for a test fit session of our new rear notch spoiler. The session should only last about 1-3 hours. We want to remove your spoiler and install ours and take notes for final adjustments before we go into production. Our 6th Gen Rear Notch Spoiler is designed to work with Coupes and Convertibles. We prefer a Coupe Camaro since we already fit it to a convertible. Your Camaro doesn't have to have its original spoiler but must have the original holes. We're hoping to have a Camaro at our office for a test fit on Monday or Tuesday, February 18th - 19th or any other day that it's not raining. We're located in Downey, CA. If you're interested in helping us out, please send an email to Storm@anvilauto.com. Storm will be able to answer any questions you may have and setup the appointment. There's compensation involved. Attachment 975120 Attachment 975121 Attachment 975122 |
done!
|
When do you think you guys might go into production with this spoiler? also is this spoiler going to utilize the factory SS/ZL1 stantion style spoiler mounting holes?
|
Quote:
The Spoiler will have both, threaded inserts and studs so that you can mount it to which ever Camaro you have. |
Awesome! Check your inbox!
|
What about the RS V6/2.0 trunk with the stock blade spoiler?
|
5 Attachment(s)
I was the lucky test fit car. This wing is the bomb! I can't wait to get one. Here are some pics I took while there.
|
When's this ready to buy?
|
Good Question...
|
Got it.
Have a spoiler now just waiting for GM to build my car. Dang |
Interested
|
i emailed anvil and this is what they said
our spoiler is more or less, available. We can take a deposit for them, now. We're still making them though. They'll be in by November. We're our sample in to test fit the first print. The Pricing on that spoiler is just about the same as our 5th Gen. $549 - Carbon with Satin or Gloss $449 - Fiberglass "Paintable" |
nowachevyguy is to get the first of the two that are out of the mold now. I Talked with a guy at Anvil and he said I could buy number two and that the first two should be ready in a couple weeks. So I paid half and we'll see how it goes.
|
<------- Does a happy jig of anticipation.
|
All times are GMT -5. The time now is 10:46 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.