CAMARO6 - B&M Cooling Systems

CAMARO6 (https://www.camaro6.com/forums/index.php)

- Transmissions (https://www.camaro6.com/forums/forumdisplay.php?f=253)

- - B&M Cooling Systems (https://www.camaro6.com/forums/showthread.php?t=489632)

B&MRacing

03-30-2017 01:24 PM

B&M Cooling Systems

Power generates heat. This fundamental truth is important to keep in mind when increasing the capabilities of your vehicle. Proper oil temperature is the key to both reliability and performance in several vital automotive systems, whether it's the engine, transmission, differential, or even power steering.

http://i.imgur.com/EbVBmiS.jpg

With a B&M cooler properly set up in your vehicle, you have 60 years of automotive engineering and knowledge looking after whatever component it's attached to. B&M coolers will serve as protection against failure, whether you are simply traveling to your next destination or racing to the finish line.

Questions? Feel free to give us a call at 707-544-4761 or visit www.bmracing.com for more information.

Max RS

03-31-2017 04:22 AM

Nice cooler but what about a AT dip stick for the Gen 6 A8 like you currently make for the Gen 5 A6?

B&MRacing

07-26-2017 06:13 PM

Quote:

Originally Posted by Max RS (Post 9645762)

Nice cooler but what about a AT dip stick for the Gen 6 A8 like you currently make for the Gen 5 A6?

We always appreciate product feedback and suggestions! We will be sute forward your suggestion over to our product development team. :burnrubber:

In the meantime if you have any additional questions, or would like a personalized product recommendation, don't hesitate to give us a call at 707-544-4761.

B&MRacing

01-22-2018 04:03 PM

Curious what a B&M Hi-Tek SuperCooler could do for your car? Steve is here to fill you in.

https://www.youtube.com/watch?v=p6SZuLkVdok

B&MRacing

03-23-2018 10:10 AM

Still looking for a SuperCooler for your 6th gen Camaro? There’s no better time than now! From now until the end of March 2018 you can instantly save up to $75 off of any qualifying B&M Racing product. This offer is only available at bmracing.com or by calling 707-544-4761.

Joshinator99

09-04-2018 12:31 PM

Quote:

Originally Posted by Max RS (Post 9645762)

Nice cooler but what about a AT dip stick for the Gen 6 A8 like you currently make for the Gen 5 A6?

This would be cool. Any plans to do this yet?

Tech@B&MRacing

09-04-2018 05:32 PM

Quote:

Originally Posted by Joshinator99 (Post 10301872)

This would be cool. Any plans to do this yet?

I have not seen or heard of a 6th Gen. transmission dipstick at this time. We love to know what our clients are looking for. If this is something that you'd like to see come to market let us know! The more interest that is out there, the greater the chance that we can make something happen.

- Jason @ B&M Racing

Joshinator99

09-04-2018 07:37 PM

Quote:

Originally Posted by Tech@B&MRacing (Post 10302198)

Jason, I guess it would be interesting to know if the dipstick was a good seller for B&M on the ‘10-‘15 Camaros? I have to think us ‘16-up guys would also like a way to check trans fluid outside of a dealership...?

Tech@B&MRacing

09-10-2018 09:49 AM

Quote:

Originally Posted by Joshinator99 (Post 10302295)

When I receive an inquiry about a product that we currently do not produce I forward the information on over to my Research and Development department for review. In some instances, the product cannot be produced due to fitment issues with the application, sometimes the design just does not work the way that we intended and of course public interest and costs play huge roles. With that said I believe that it's a good idea and a product that idea that should receive additional consideration. I will be looking further into this and hopefully get back to you with some info!

- Jason @ Flowmaster

All times are GMT -5. The time now is 10:31 AM.