CAMARO6

CAMARO6 (https://www.camaro6.com/forums/index.php)
-   V8 LT1 Engine, Exhaust, and Bolt-Ons (https://www.camaro6.com/forums/forumdisplay.php?f=231)
-   -   Michael "Bolt-on" will sing... (https://www.camaro6.com/forums/showthread.php?t=585430)

17MaroSS 12-03-2020 12:24 PM

Michael "Bolt-on" will sing...
 
..."When a Man Loves a Camaro"!




Haha sorry could resist. That's right, my LT2 manifold came in today!! Ordered it from gpi on Black friday - saved a penny and super fast delivery time! Man I can not wait to get this on the car. I have that same feeling I had when I was a teenager about to get my first bj lol.

I had gpi do the modifications to the underside of the manifold in order to have it fit on my Camaro. Also ordered the map extension harness.

I plan to run it with my Vmax stock ported throttlebody and rotofab. Texas speed headers and lethal's flex fuel line will be installed all at the same time. Then Pray's tune to tie everything together.

What kind of dyno numbers would I see with that setup? car is a 6sp.

Lastly, any tips, tricks, or anything I should be made aware of about the install of this manifold? Thanks in advance

17MaroSS 12-03-2020 12:29 PM

2 Attachment(s)
She's a beauty

Brudda*Termite 12-03-2020 04:50 PM

I think there's a thread here somewhere with tips, how to adjust for size, etc...

s346k 12-03-2020 06:46 PM

1 Attachment(s)
might need to modify the vacuum lines on the driver side. the pcv stuff where it goes into the intake manifold will be different. i had a catch can already so it wasnt a big deal, but idk if the stock lines will work as the inlet nipple placement is different from stock.

edit: added pic

17MaroSS 12-03-2020 11:46 PM

Quote:

Originally Posted by s346k (Post 10913092)
might need to modify the vacuum lines on the driver side. the pcv stuff where it goes into the intake manifold will be different. i had a catch can already so it wasnt a big deal, but idk if the stock lines will work as the inlet nipple placement is different from stock.

edit: added pic

Thanks!


All times are GMT -5. The time now is 11:44 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2021, vBulletin Solutions, Inc.