CAMARO6

CAMARO6 (https://www.camaro6.com/forums/index.php)
-   Forced Induction Discussions (https://www.camaro6.com/forums/forumdisplay.php?f=236)
-   -   Round 3 of mods (https://www.camaro6.com/forums/showthread.php?t=585429)

MSU120 12-03-2020 11:29 AM

Round 3 of mods
 
Round 3 of mods is officially underway. The following work will be done:

—Cam with the following specs:
Intake duration—228 @ .050
Exhaust duration—240 @ .050
Intake Lift— .646”
Exhaust Lift—.646”
Lobe Separation—116

—Kooks 2in long tube headers with green cats
—OEM heads CNC’d to stage two specs
—BAP for low side pump

I’m looking forward to seeing how this turns out.

KingLT1 12-03-2020 09:39 PM

Might as well do drop in rods and pistons if taking it that far.

MSU120 12-03-2020 10:55 PM

Quote:

Originally Posted by KingLT1 (Post 10913187)
Might as well do drop in rods and pistons if taking it that far.

Thought about it......

supersportss 12-03-2020 11:12 PM

That cam is perfect for nitrous. Sprayin.

Choda 12-04-2020 08:57 AM

Quote:

Originally Posted by KingLT1 (Post 10913187)
Might as well do drop in rods and pistons if taking it that far.

100% they are not stupid expensive too.

MSU120 12-04-2020 09:24 AM

Quote:

Originally Posted by Choda (Post 10913349)
100% they are not stupid expensive too.

I’m guessing it will add over 2k to the cost of the build.

KingLT1 12-04-2020 10:17 AM

Still a lot cheaper then doing it twice.

MSU120 12-04-2020 10:54 AM

Quote:

Originally Posted by KingLT1 (Post 10913396)
Still a lot cheaper then doing it twice.

Very true!

NYblack1le 12-04-2020 11:12 AM

$1700 for the drop ins. Gpi charges like 3k to have done or like $600 if the engine is out.


All times are GMT -5. The time now is 11:12 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2021, vBulletin Solutions, Inc.