OEM wheel specs?
 

Hi all wondering

If someone has the dimensions of the various stock wheel sizes
In particular what are the stock offsets for the different wheels?

I have a 2LT RS and like the way the ss1LE wheels fill the fender arches. Knowing the stock offset and width of my wheels compared to the 1 LE would help me choose what wheels to buy

Thanks!

This is a 2LTRS with the mmr 017 (1LE)
MMR - 20 X10 +23, 20 x 11 +43 tires: 275/35/20 & 295/35/20 (you can also do 285/305)
http://i67.photobucket.com/albums/h3...shclfmczh.jpeg
http://i67.photobucket.com/albums/h3...snnlkn1ub.jpeg

Stock 2LT RS wheels are 20 x 8.5 et 25mm fronts
* 20 x 8.5 et 25mm rear.
* tires: 245/40ZR20 tires all around

Thank you I love those!

I’m thinking I’d like to do a square set (this is my commuter car)

20x10 20mm off set with 285/30 tires all round and maybe a 3mm spacer on rear

Do you think I’d have any rubbing in the front or have to reroute any wires?

Not with 285’s.......only the 305 needs rerouting....even If you have to reroute wires, it’s a 15 minute operation with a zip tie and the wheel off, no big deal

This is the exact same setup (square) I just put on my SS (No spacer). It looks great!

Glen e, your Camaro is just gorgeous!

Hey there Glen, this was just the thread I was looking for. I had folks telling me that my 2016 2LtRS was staggared, but when I check it also looks like I have 245/40ZR20 tires all round, so I am going to assume that I have 20 x 8.5 et 25mm all round with 5x120 bolt configs. And now after reading this I know I can look for 20 X10 +23, 20 x 11 +43 tires: 275/35/20 & 295/35/20 without any mods .. GREAT! .. thanks very much :) :hail: