CAMARO6

CAMARO6 (https://www.camaro6.com/forums/index.php)
-   V6 LGX Engine, Exhaust, and Bolt-Ons (https://www.camaro6.com/forums/forumdisplay.php?f=233)
-   -   Rear rotor options? (https://www.camaro6.com/forums/showthread.php?t=601213)

donniedarko 01-10-2022 01:31 PM

Rear rotor options?
 
I have an LT1. Looking for solution to update rear rotor.

You guys do anything on yours? DBA or EBC work?

Tia

Mark114 01-10-2022 01:41 PM

Here is a thread that discusses the topic:

https://www.camaro6.com/forums/showthread.php?t=601147

donniedarko 01-10-2022 02:49 PM

Thks Mark… Im aware of the caliper assembly and restriction.

I was wondering about just rotors. I wanted to put the DBA rotors on but cant get confirmation. The CS at DBA wasnt clear either. : /

Mark114 01-10-2022 04:05 PM

Maybe the LT1 rear brakes are the same as the V6 1LE brakes? I donít know but maybe somebody else does. It so, then maybe this thread helps.

https://www.camaro6.com/forums/showthread.php?t=513521

shadogt 01-17-2022 07:29 AM

Quote:

Originally Posted by donniedarko (Post 11118634)
I have an LT1. Looking for solution to update rear rotor.

You guys do anything on yours? DBA or EBC work?

Tia

I have a set of slotted R1 Carbon GEOMET Rotors from R1 Concepts. I've tracked them and they were fine on my V6 M6. The slotted rears look good with my 4 Piston front upgrade, with slotted fronts. Though they don't match perfectly.

https://www.r1concepts.com/detail_ca...-GEOMET-SERIES

dpevans 01-20-2022 04:13 PM

I think you will be hard pressed to find an upgraded rotor of the rears on an LT. I don't even think DBA makes a rotor for the back. The only ones I have been able to find are a few choices at R1 concepts mentioned above. From my track experience (which is minimal) the brake set up with the RPO JL9 works just fine with upgraded GLoc track pads and fluid for the OEM tire size. My next upgrade is tire width to increase the contact patch for better grip and braking and a track alignment, and then maybe upgrade to 4 piston Brembos on the front. I have done numerous 7-20 minute sessions with under hard braking and have never had any brake fade. If you want track pad part numbers drop me a note I can look it up but I only use them at the track they squeal like a pig.


All times are GMT -5. The time now is 07:46 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2022, vBulletin Solutions, Inc.