ZL1 1LE wheels offset confirmation (from a new owner or dealer)
Now that the 1LE's are arriving at dealers, can someone with access to one get a confirmation on the F and R wheel offsets? I've heard rumours online, but no one can actually confirm. GM parts departments have them listed at +50et, which is obviously wrong.
Would be greatly appreciated! |
I THINK This is right:
Stock 1LE is +20 & +43 |
Quote:
|
Yep, ZL1 1LE, not SS.
|
Beat me to it.
Mr. W, are you willing to take a wheel off for us? |
Quote:
|
I dont think you understand offsets correctly. Offsets don't play a role at all in diameters of the wheels.
From internet rumours, it appears that the offsets may be similar to the z28 wheels, at least on the front 19x11 +11et, but I can't get this confirmed. I have yet to hear anything about the rear 19x12. |
ZL1 vs. ZL1 1LE Wheel offset
Does anyone know the offsets of the ZL1 1LE wheels? I know they are 19 X 11 on front and 19 X 12 on the rear but would like to know the offsets.
I know the ZL1 (non-1LE) are the same size and off set as the SS 1LE: 20 X 10 @ 20 mm and 20 X 11 @ 43 mm. I appreciate the information. Thanks ! |
I would like to know the ZL1 1LE off set as well. I got a ZL1 1LE shipping to me any day now and I want to have DD rims and keep the OEM for Track days.
|
Quote:
|
Quote:
2017 Chevrolet Camaro SS Here are some options that fit your vehicle. Keep in mind, choosing one of these wheel options may require a different tire size. FRONT 20" (+0) 21" (+1) 22" (+2) REAR 20" (+0) 21" (+1) 22" (+2) |
Somebody please take their ZL1 1LE wheels off and take photos of the offset specs. Many thanks !
|
Good luck with the off-sets....Is there no vendor that makes a similar wheel for the ZL-1s?
I'm sure it will be a close fit....but just bear in mind the struts are different on a 1LE (smaller diameter)....The overall height and type of tires is important....The offset needed for a 19" wheel would be different than a 20" tire and wheel depending on the spring perch, ride height, and strut diameter and location... ...Good luck. But personally, I would let an aftermarket vendor work out the specs for each wheel and tire size for a custom off-set.... Good luck, and don't rush into anything. |
I'd be happy to take some images/pictures of wheel offsets...but unfortunately, I won't have the time to do so until after the 4th...and even then - I've got to check and see if my garage jack will even fit under this thing. :sm0:
|
All times are GMT -5. The time now is 12:51 AM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.