CAMARO6

CAMARO6 (https://www.camaro6.com/forums/index.php)
-   Audio, Video, Bluetooth, Nav, Radar, Electronics (https://www.camaro6.com/forums/forumdisplay.php?f=228)
-   -   Replacing HMI (https://www.camaro6.com/forums/showthread.php?t=584113)

Kristoff 11-04-2020 04:34 PM

Replacing HMI
 
My HMI unit is bad. Out of bumper to bumper warranty. Anybody has replaced their HMI units? who can program the HMI unit? can a used one be purchased and installed? thanks in advance!

SinSStrNJ 04-19-2021 07:17 PM

Not sure if this is still needed, but check with Gen5DIY. They have some solutions that may work for you.



https://www.gen5diy.com/

cellsafemode 04-20-2021 02:46 PM

what makes you think the hmi is bad?

As opposed to say the display being bad.... or a cable between the two being loose/damaged?

Kristoff 04-20-2021 06:21 PM

I figured it out. It was a bad HMI. I checked cables and voltages. I did go with gen5diy. They programmed it and did the front camera upgrade. It's working like a charm. Thanks for replying.

travis05 09-12-2022 07:34 AM

Replacing HMI
 
Can you expand on what they symptoms were before you replaced the HMI?


Have a 2017 Camaro SS the screen went black and doesn't work when touched and neither do the physical buttons below the screen. Disconnecting the battery for a while does nothing.


All times are GMT -5. The time now is 07:29 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.