CAMARO6

CAMARO6 (https://www.camaro6.com/forums/index.php)
-   Road Course/Track and Autocross (https://www.camaro6.com/forums/forumdisplay.php?f=258)
-   -   Rear sway bar stiffening - ZL1 1LE (https://www.camaro6.com/forums/showthread.php?t=624666)

wakespeak 04-03-2024 09:10 PM

Rear sway bar stiffening - ZL1 1LE
 
Been stock. Thinking to go out on the rear bar for the 15% increase in stiffness. Anyone tried this and have impressions? Looking for a bit more rotation in the turns.

Badmojo 04-06-2024 02:48 PM

It's easy to do at the track, so I would say try it out. I ran a couple of days with it in the softer setting to see if it would improve corner exit grip. I went back to the neutral (middle) setting and the car was faster.



If you get too much rotation, then you can always dial it back by lowering year tire pressure or adding rear negative camber.



https://www.youtube.com/watch?v=r3bUlB1k3pk

wakespeak 04-09-2024 10:05 PM

Quote:

Originally Posted by Badmojo (Post 11416779)
It's easy to do at the track, so I would say try it out. I ran a couple of days with it in the softer setting to see if it would improve corner exit grip. I went back to the neutral (middle) setting and the car was faster.



If you get too much rotation, then you can always dial it back by lowering year tire pressure or adding rear negative camber.



https://www.youtube.com/watch?v=r3bUlB1k3pk

Thanks for the video, looks easy to move.

Checkmate1 04-12-2024 07:10 AM

It depends on the track you go to. With the softer rear setup, you will get more understeer that suits some tracks better. The softer rear does help put the power down better at the expense of rotation. It's essentially players choice.


All times are GMT -5. The time now is 02:11 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.