CAMARO6 - ZL1 Dive planes (Canards)

CAMARO6 (https://www.camaro6.com/forums/index.php)

- ZL1 Discussions (https://www.camaro6.com/forums/forumdisplay.php?f=235)

- - ZL1 Dive planes (Canards) (https://www.camaro6.com/forums/showthread.php?t=521371)

Skylane765

02-20-2018 02:33 PM

ZL1 Dive planes (Canards)

2 Attachment(s)

We now have the ZL1 Dive planes for the 6th gen Camaro here at www.zl1addons.com, we have had many calls for them. No drilling of the fender, just 2 small 1/64 holes next to the grill.

drfeelgood

02-20-2018 03:12 PM

Quote:

Originally Posted by Skylane765 (Post 10083008)

We now have the ZL1 Dive planes for the 6th gen Camaro here at www.zl1addons.com, we have had many calls for them. No drilling of the fender, just 2 small 1/64 holes next to the grill.

I can dig it. I am glad you guys made it so that the dive plane runs and extends UNDER the vertical DRL rather than cutting through that area.

only 5 left in stock now ;)

demonik

02-20-2018 04:30 PM

Is there any way to get them to match the gloss back on the zl1 vs the matte on the zl1 1le?

BIGTIME

02-20-2018 04:33 PM

I like! Are they as firm as the oem

Skylane765

02-20-2018 06:41 PM

Quote:

Originally Posted by demonik (Post 10083154)

Is there any way to get them to match the gloss back on the zl1 vs the matte on the zl1 1le?

Not at this time. We may come out with carbon fiber also soon.

Skylane765

02-20-2018 06:43 PM

Quote:

Originally Posted by BIGTIME (Post 10083160)

I like! Are they as firm as the oem

Yes even firmer, but you have to install making holes in the bumper, and mount like the OEM do and most do not want to do that. We do have a option for that just ask.

Skylane765

02-20-2018 06:47 PM

Quote:

Originally Posted by drfeelgood (Post 10083061)

I can dig it. I am glad you guys made it so that the dive plane runs and extends UNDER the vertical DRL rather than cutting through that area.

only 5 left in stock now ;)

Yes and they mount with upper brackets and lower very small holes that looks more like the factory OEM dive planes, so if you take them off you will not see any holes in the bumper but a very small 1/16 holes next to the grill. You can also not put the small holes and use blocks and not have the small holes.

Infern0

02-20-2018 07:03 PM

No way to get the lips on the outer edge?

https://icdn-9.motor1.com/images/mgl...irst-drive.jpg

All times are GMT -5. The time now is 03:47 AM.