CAMARO6
Page 2 of 9 1 2 3456 Last »
Show 40 post(s) from this thread on one page

CAMARO6 (https://www.camaro6.com/forums/index.php)
-   Member Car Journals (https://www.camaro6.com/forums/forumdisplay.php?f=294)
-   -   PhillyAndSeattle's 2017 MBM SS 1LE - Ultimate DD/Track monster (https://www.camaro6.com/forums/showthread.php?t=476555)

aa406079 12-24-2016 02:44 PM
what LED's did you replace the rear tail lights with?

RideZX6R 12-29-2016 12:30 AM
Quote:
Originally Posted by aa406079 (Post 9470911)
what LED's did you replace the rear tail lights with?
Got the tails used from a guy who was in an accident (not his fault) and the LEDs were already in them, so sorry but I don't know.

RideZX6R 01-09-2017 09:47 PM
Got the black badges on - Still got some badge work to do tho...

-Got a custom "1LE" badge on the way which I'll be putting in the spot that the stock "SS" badge is in on the rear. So it has the SS badge in front and 1LE out back
-Will be removing the Camaro fender badges as well

Only pick I got at a meet with some friends...
http://i.imgur.com/GUkBymT.jpg

F1FTY 01-10-2017 10:51 AM
Good idea on the 1LE badge. Looking forward to seeing the completed work!

RideZX6R 01-27-2017 12:40 PM
Black badges on and cleaned up - and a sneaky mod you might spot....

http://i.imgur.com/ep4s6ql.jpg
http://i.imgur.com/gyqTDKF.jpg
http://i.imgur.com/PYalLPn.jpg

RideZX6R 01-27-2017 12:42 PM
Next mods will be the ZL1 Add-ons wickerbill, a set of stainless lines, RBF600 and probably will look into G-Loc pads (although they're crap at returning email), and lowering springs.

After that the focus will shift to wheels/tires and power.

RideZX6R 02-13-2017 03:38 PM
Wickerbill is on... :)

http://i.imgur.com/qgBp0XV.jpg
http://i.imgur.com/S15jO76.jpg

More pics to come soon of the whole car

RideZX6R 02-15-2017 09:27 PM
Proper pics...
http://i.imgur.com/zTCfhRz.jpg
http://i.imgur.com/fHFiWod.jpg
http://i.imgur.com/0T5GyU7.jpg
http://i.imgur.com/m1e0mMP.jpg
http://i.imgur.com/jwVDycP.jpg
http://i.imgur.com/Pb9eYqp.jpg

Hard Parker 02-28-2017 06:42 AM
How much were the LED reverse lights

RideZX6R 02-28-2017 04:03 PM
Quote:
Originally Posted by Hard Parker (Post 9585016)
How much were the LED reverse lights
Answered elsewhere in this thread...

Quote:
Originally Posted by aa406079 (Post 9470911)
what LED's did you replace the rear tail lights with?
Quote:
Originally Posted by RideZX6R (Post 9476473)
Got the tails used from a guy who was in an accident (not his fault) and the LEDs were already in them, so sorry but I don't know.

RideZX6R 03-02-2017 12:44 AM
These showed up today :)

https://scontent.fsnc1-1.fna.fbcdn.n...b8&oe=596E79B2

Ryephile 03-02-2017 10:49 AM
Quote:
Originally Posted by RideZX6R (Post 9589326)
These showed up today :)
:love: Pretty pretty please do a suspension stroke measurement work up. I'd love to know if the Eibach's retain any compression travel prior to becoming bumpstop active. I know with the MRC's the bumpstop isn't visible, you'll have to feel for it w/out the spring installed.

Nobody, not even the vendors, have done a stroke analysis yet. This would be very helpful for those of us wanting to actually improve the handling.



Also, the wicker bill spoiler looks awesome! How was the install, easy?

Finally, G-Loc works best on the phone. They're old school that way, like most race shops.

RideZX6R 03-02-2017 01:32 PM
Quote:
Originally Posted by Ryephile (Post 9589965)
:love: Pretty pretty please do a suspension stroke measurement work up. I'd love to know if the Eibach's retain any compression travel prior to becoming bumpstop active. I know with the MRC's the bumpstop isn't visible, you'll have to feel for it w/out the spring installed.

Nobody, not even the vendors, have done a stroke analysis yet. This would be very helpful for those of us wanting to actually improve the handling.



Also, the wicker bill spoiler looks awesome! How was the install, easy?

Finally, G-Loc works best on the phone. They're old school that way, like most race shops.
I'm afraid I have no idea how to do such a thing. :(

Wickerbill install should take 60 mins or less, and 75% of the time is measuring/prep - 25% drilling/install.

Already got the info from G-Loc a while back, just haven't ordered yet.

drew.87 03-05-2017 12:20 PM
Car looks great. Really looking forward to seeing how it looks dropped and thoughts on how it rides.


All times are GMT -5. The time now is 08:43 AM.
Page 2 of 9 1 2 3456 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.