Official 1LE/MRC Lowered thread.
 

Post pics of lowered 1LE cars or cars with MRC.

Hope this takes off. I’m yet to find any springs that lower MRC cars without leaving the front higher than the rear. I would really like to see a set that lowers the 1le even or maybe a tad lower in the front.

Subscribed!

I have a set of Eibach Pro Springs for a 1LE, I will sell at a good price. NIB! I ordered the wrong springs and they want $65 to send back. I’m in Coral Springs. $250

Ray

We need pics of lowered cars please.

In for this as well. I may just do coilovers and scrap the mrc all together. My last four cars were lowered no problem suddenly this thing can't be more than a half inch. With all the technology out there no one has figured out how to lower an mrc and recalibrate the mag to work properly?

I’ve yet to see a ZL1 with any legitimate lowering. Most I’ve seen posted is 1/2” lower at the front and same height at the back.

Bump! Definitely wanting to see other lowered 1LEs.

There’s some pictures of lowered 1LE’s in the specific 1LE sub forum. However, there’s a lot of hate surrounding that so, be forewarned.

I searched can't find any pics

Here you go.
ST-suspensions edit: ops, sorry. Didn’t see the 1LE only.:doh:

Just a fair warning, if you lower a SS 1LE or ZL1 past 0.5" you begin to really FUBAR the roll-center of the front suspension. After that, you need to stiffen the springs up quite a bit to get the same roll-stiffness. If you just care about the looks, then that statement means nothing to you.

Ride height looks great! Does your car have MRC? And I have not seen those springs listed before...are they not sold in the US?

I apologized for the late reply,
Yes, I have MRC and the springs should be sold in the US as it is/was a US-company.
ST-suspensions from California. It belongs now the the German KW automotive company the world leading company if it comes to coilover and springs.
KWsuspensions