Clutch/flywheel?
 

Hey all,
Needing some input on which kit to get. Based upon my setup, I'm torn on which setup to go with. Trying for something that can hold torque, but have lifespan of close to oem and feel. I've seen clutchmasters, but they rattle or spec clutch.
Any help would be great!

No experience with this beyond drooling at the pictures:
https://www.camaro6.com/forums/showthread.php?t=600641

I’m partial to this one too :)

That is obviously not compatible with our manual transmission. Go with Spec. They are the best option.

So probably the stage 2 option? I will get their flywheel as well to reduce Rev hang and quicker revs.

Well, there you go.
So much for looking at pictures.

You have to get their flywheel with it. Their clutch is not compatible with anything else.

My engine is out for piston/rod upgrade and my factory clutch is also damaged. What did you end up with, and did you like it?


Kurt

What clutch did you guys go with?
 

We are big fans of the Spec clutches. These are great quality clutches and even as you hit stage 3 remain comfortable for daily driving.

I have not gotten a clutch as of yet. Getting suspension parts atm. I was leaning towards the stage 2+ and flywheel for end of summer time.

I haven't been on this sight in a minute, thanks for the reply. My flywheel had already moved, I think I want a solid flywheel this time when I replace the clutch. My clutch still seemed like it functioned well when I took it apart, but I don't drag race it or run it hard anywhere with much tire grip. I run it in an open road race here in Texas, and my son sometimes uses it for autocross. He takes off aggressive at the autocross, but grip isn't very good so I'm not sure it's very hard on the clutch. I was surprised that the factory flywheel was already twisting out of place, and it's very heavy! What brands offer a kit with flywheel included that will hold 400-450hp?


Kurt

I think clutchmasters and spec are the only 2 that offer a flywheel to be used with their clutch. I have not seen any of them put out torque capacity, but I would imagine the spec 2 clutch and clutchmasters 400 would do well for the above 400 torque curve.