Magnuson supercharger install
 

Hey everyone,

In all honesty I don’t know how this install will end, but I figured I share with the community that has been a wealth of knowledge for me. I have gathered a lot of information from this forum. I mean, even got my Maggie used on here lol. Nevertheless I have a YouTube channel which vlogs all this car stuff so please check out my build. The link to the video will show the first part of the install, enjoy. Also, if you guys can share any feed back, please do so. Thank you.

Current mods:

2016 camaro ss M6

Stock intake, with cut box and green filter
Shorty hooker black heart headers
Borla mids
Magnaflow axle back (npp)
Skid mark garage e85 (will probably just run 91 for this)
Granatelli performance wires
Ngktr7s
Gforce entry level axles
Forge star drag pack

Kpfabandtune will be tunning car

I have a Katech 103 I might make fit, if not will use stock Tb.


Please check out my video and subscribe �� for the whole install

Part 1: front bumper removal
https://youtu.be/L2p5p8YAnww

Part 2: removing the air intake / manifold
https://youtu.be/iWVk5AsMUfw

Part 3: re-routing Pcv valve and removing e fans
https://youtu.be/XaeOnMVzrcE

Part 4: Removing lt1 pulley
https://youtu.be/dgWspXm271Q

Part 5: Installing pulley
https://youtu.be/HjTIgIpmmmY

Part 6: Missing parts Rant and some time lapse
https://youtu.be/EJTz3StWqLM

Part:7 porting of the snout
https://youtu.be/wMOxQPb-t8w

Part 8: keeping it cool with Granatelli’s new 160 degree thermostat
https://youtu.be/0Wh2yVgy_zg
Video updates, sorry I haven’t been updating these but here ya go!


The dyno session
https://youtu.be/F9jUxI3CZb4

Cool deal, glad you got all your parts together

Nice!

Thanks you, I almost have everything. Just waiting on the intercooler pump, hoses and wiring/relay. Do you think the stock fuel system can handle the above mods? Really looking into alky control as a supplemental fuel system.

Not the e85? I think you'll run out of fueling.

Thank you sir

Oh ok, so if I stick with 91 on the stock pulley, we should be good.

Yep.

Moving along pretty slow but here is part 2. Thank you all who is following the build ��

https://youtu.be/iWVk5AsMUfw

This is great content, thanks for putting this together! Way to grab that last in/lb lol.

Good stuff. Love your videos

Thanks guys can’t wait to hear it turn on lol

Roll on my man.

okay guys, part 3 has hit the channel. I Apologize for some poor camera angles on this one. But I think it still showed some good key points.

Pt3. Re-routing the pvc valve and e-fan removal, in preparation for the harmonic balancer removal.

https://youtu.be/XaeOnMVzrcE