CAMARO6 - Niche wheels ????

CAMARO6 (https://www.camaro6.com/forums/index.php)

- Wheels | Tires -- Sponsored by The Tire Rack (https://www.camaro6.com/forums/forumdisplay.php?f=227)

- - Niche wheels ???? (https://www.camaro6.com/forums/showthread.php?t=556999)

smurf_killer

06-23-2019 12:16 PM

Niche wheels ????

Looking at set of niche wheels 5x120. With 72.6. Hub bore 20x9 +35 offset 6.3” backspacing. 20x10.5 +35 offset 7.1 backspacing

I’ll wrap them in nt555 g2s. Maybe 285/30/t20 & 315/30/20 or 305

Being as we have a full machine shop I’m not truly worried about spacers if needed I can make them from billet aluminum any thickness I want.

What is the hub bore on the SS as I understand these are hub centric

BradfordCamaro

06-23-2019 12:21 PM

66.9

Larrio Andretti

06-23-2019 01:40 PM

67.1

smurf_killer

06-23-2019 03:19 PM

Ok then that’s not a prob on center bore I can use the adaptor rings, Looks like backspace on rear will be ok. Prob have to use a spacer on front to keep from rubbing the strut

All times are GMT -5. The time now is 02:26 PM.