Will Stock 18s fit
 

Does anybody know if the stock oem 18s will fit the front 6 piston calipers on our cars? I can get 2 for cheap and thinking of using 2 upfront as a drag setup (I know not a drag cars haha) since the height matches my current rear drag setup.

Scratch this, I dug deeper and found out they fit.

Winter setup done

Tires sticky AF, holding it on the ceiling!

Nice, I have the exact same ones but I plastidipped them black

Yeah good idea...........lol

I'm assuming you both are running 245/50/18 tires front and rear on these wheels. I'd like to do the same setup for winter tires. Are you having any issues with traction control, ABS, or any other nannies getting confused by the equal tire diameters?

I've been running 245/50/18 square for the past two winters with no issues. Tons of people run a square setup on the track as well without problems.

Thanks. That's what I figured, because there is only 0.4" difference in diameter between the stock front and rear tires anyway...and because obviously the base models run same-size tires front and rear all the time. There's just always that one person that says even the slightest change will trip up the nannies.

Do you know if that setup would also work on a 1LE?

Considering that they're on a 1LE, yes I'd say it probably would work.

ROFL :smiling1:

Bope

245/50/18 on 18” RS wheels, anyone have issues with the tires rubbing on something in wheel wells during full lock?