Refitting ported supercharger - torque specs and pattern?
Dear all
I am refitting my LT4 supercharger after porting. What are the torque specs and the torque pattern? cheers cirpower |
Search the forums for the “catch cans ”. Lots of information regarding the pattern and torque specs due to the fact that you have to pull the SC. Good luck buddy
|
89 in / lbs and use new bolts.
|
Quote:
|
Google it there is a picture of the pattern and tourqe is 89in lbs. Use a 1/4" drive torque wrench. I reused my bolts once but wouldn't recommend more then that. And be sure not to over torque. 89 inlbs is not alot. Wouldn't take much to snap them
|
2 Attachment(s)
quick search:
|
Bolt #7 in the sequence for bolting the supercharger to the motor will be a pain in the ass to get in there !!!
the cowl will be in the way, i'm sure you had to deal with it when taking the supercharger off the motor. |
Thanks everyone! I did find some of the pictures online, but wasn't sure if they really apply to the Camaro, that's why I asked. Better safe than sorry. Great to have so much help in this forum by great car guys! cheers cirpower
|
All times are GMT -5. The time now is 02:18 AM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.