CAMARO6 - ZL1 LT4 engine builder plaque??

Page 4 of 24

Last »

Show 40 post(s) from this thread on one page

CAMARO6 (https://www.camaro6.com/forums/index.php)

- ZL1 Discussions (https://www.camaro6.com/forums/forumdisplay.php?f=235)

- - ZL1 LT4 engine builder plaque?? (https://www.camaro6.com/forums/showthread.php?t=490526)

363mp

02-20-2020 04:14 PM

Quote:

Originally Posted by Drews (Post 10728507)

Oh... sorry 363mp...i forgot to add your VIN ending to the list , just added your VIN 14319 to my list... your in the U.S. right?

Congrats...welcome to the list buddy!

Drew’s, Yes I live In Pittsburgh Pennsylvania. Thank you for all research you’ve been doing.

JTRJSS

02-21-2020 05:46 AM

Quote:

Originally Posted by ZL1 affair (Post 10727683)

Nice! Hope she's running good?

So far So good. Still breaking it in.

ZED SLED

02-21-2020 06:33 AM

I'm glad mine was built by a robot. Because computers don't make mistakes...mistakes...mistakes...mistakes...mistak es...mistakes...mistakes...mistakes...mistakes...m istakes...mistakes:smiling1:

Drews

02-21-2020 10:10 AM

Usually the LT4's normally found in the ZL1's are built at the Tonnawanda plant in NY...

....by the way... they are also partially made by hand...but by several different people along an assembly line

Don't worry... either way, all assemblys have strict guidelines to follow and have several check points along the way

https://www.youtube.com/watch?v=bLtZNtvc1Aw

Jverado

02-21-2020 10:25 PM

Hand built is cool and so is the new computer controlled robots GM uses. This is a cool video from the tonowanda plant if you haven't seen it yet:

https://youtu.be/bLtZNtvc1Aw

20Madman

02-24-2020 10:01 AM

I had a chance to take my 2020 with the engine builder plaque out from under the cover this past weekend and production date was 9/19.

ZL1 affair

02-24-2020 12:07 PM

Quote:

Originally Posted by 20Madman (Post 10731457)

I had a chance to take my 2020 with the engine builder plaque out from under the cover this past weekend and production date was 9/19.

Who built your LT4?

20Madman

02-24-2020 02:56 PM

I was so excited to get the chance to take for a ride I forgot to look.
I will check tonight, if I remember first name was either Adam or Alex.

20Madman

02-24-2020 07:59 PM

Checked tonight I was wrong with name. Mine was built by Andrew Kline, says Performance Build Center Bowling Green, KY.
I’m not sure how to post pictures, will be happy to post if I figure out how.

Tayley1LE

02-25-2020 05:57 PM

1 Attachment(s)

Mine has one. It was built in October. The week after the strike ended.

Scottyz

02-25-2020 06:16 PM

Quote:

Originally Posted by Tayley1LE (Post 10732700)

Mine has one. It was built in October. The week after the strike ended.

Man I bet your itching to get out for a ride. I am.

Drews

02-25-2020 08:33 PM

Hi there Tayley1LE ,... would you mind sharing the last 5 digits of your VIN for us.

I'm taking note of all the VIN's i can find, first to see if there are any pattern's in the build cycles, and to try to establish some kind of rough percentage of how many are out there.

And also... simply for pure amusement.

Congrats on owning a Hand-built plaqued LT4 buddy!

Andrew

363mp

02-25-2020 08:52 PM

Quote:

Originally Posted by 20Madman (Post 10731457)

I had a chance to take my 2020 with the engine builder plaque out from under the cover this past weekend and production date was 9/19.

What’s the last 5 numbers of your VIN?
Forget it I saw you already gave your vin number in an earlier post.

LT4Greg

02-25-2020 08:53 PM

Good idea Andrew compiling a list of the LT4s built with the assembly plaques!��

All times are GMT -5. The time now is 01:16 PM.

Page 4 of 24

Last »

Show 40 post(s) from this thread on one page