CAMARO6

CAMARO6 (https://www.camaro6.com/forums/index.php)
-   Wheels | Tires -- Sponsored by The Tire Rack (https://www.camaro6.com/forums/forumdisplay.php?f=227)
-   -   Official APEX Wheels Showroom Gallery (https://www.camaro6.com/forums/showthread.php?t=515659)

Apex Wheels 03-07-2019 05:32 PM

Quote:

Originally Posted by carguy55 (Post 10432854)
They need to make more wheels specifically for the Camaro so you don't have to use the hubcentric rings

You are right, we do indeed....and we are!

https://www.apexraceparts.com/blog/t...ecific-wheels/

We expect to have these on hand at the end of May :thumbup:

- Cory

Apex Wheels 03-13-2019 06:36 PM

Our friend Andy is back again with his 5th gen SS and Z/28 flares, this time showing off our upcoming Camaro specific wheels. These feature a 67.1mm centerbore for a perfect fit and a knurled bead to prevent tire slippage under extreme forces. Stay tuned for more info as we are nearing the launch of the introductory Group Buy!

19x11" ET11 with 305/30-19 Bridgestone RE71R tires up front, and 19x11" ET43 with the same 305/30-19 RE71R's in the rear.

https://farm8.staticflickr.com/7888/...3e7326ac_b.jpg
https://farm8.staticflickr.com/7862/...ee8d7e63_b.jpg
https://farm8.staticflickr.com/7877/...a32486ff_b.jpg
https://farm8.staticflickr.com/7925/...8f2e4045_b.jpg

- Cory

Apex Wheels 03-21-2019 06:35 PM

More Camaro specific ARC-8 goodness coming at ya. 19x11" ET11 front, 19x11" ET43 rear, wrapped in 305/30-19 Bridgestone RE71R's at all four corners.

https://farm8.staticflickr.com/7828/...8294521d_b.jpg
https://farm8.staticflickr.com/7879/...c573cbf4_b.jpg
https://farm8.staticflickr.com/7907/...88556ced_b.jpg
https://farm8.staticflickr.com/7867/...fdcbe51e_b.jpg
https://farm8.staticflickr.com/7914/...ea6382d6_b.jpg

- Cory

Apex Wheels 04-04-2019 06:46 PM

Check out this video highlighting our recent photo shoot with a 2018 ZL1 1LE, mounted with our 19x11" ET11 front and 19x11" ET43 rear, all wrapped in 305/30-19 Bridgestone RE71R tires.

https://www.youtube.com/watch?v=XEaE1TxuVYQ

- Cory

1CEBITN 04-10-2019 02:58 PM

On the following setup from your site it says direct fit:
Front: 19x10” ET20 with 285/35-19 tires
Rear: 19x11” ET43 with 325/30-19 tires

On my 2SS vert with MRC will the 325s in the back require wiring harness relocation (ARC-8 or EC-7)? The 20's do for anything over 305s so that's why I'm asking. Thanks!

Apex Wheels 04-23-2019 12:50 AM

Quote:

Originally Posted by 1CEBITN (Post 10486553)
On the following setup from your site it says direct fit:
Front: 19x10” ET20 with 285/35-19 tires
Rear: 19x11” ET43 with 325/30-19 tires

On my 2SS vert with MRC will the 325s in the back require wiring harness relocation (ARC-8 or EC-7)? The 20's do for anything over 305s so that's why I'm asking. Thanks!

I personally haven't heard anything about that, but cannot confirm to be honest.

Apex Wheels 04-23-2019 12:51 AM

Yunick Motorsports' SS 1LE looks sinister sitting on some 18" SM-10 wheels in Race Silver.

18x11" ET25 square
3/8" front spacer with ARP Studs
315/30-18 BFG Rival S Front
335/30-18 BFG Rival S Rear

https://live.staticflickr.com/7841/4...b0d77568_b.jpg
https://live.staticflickr.com/7923/4...17117b44_b.jpg
https://live.staticflickr.com/7901/4...dbd9bec8_b.jpg

- Cory

Apex Wheels 05-06-2019 06:21 PM

Chip's ZL1 1LE was the perfect fit when we got our hands on the first 19x12" sample wheel. Check out the video our team whipped up to show off the 19x11" ET11 and 19x12" ET41 staggered setup, wrapped in the factory 1LE spec 305/325 Goodyear Supercar 3R tires.

https://www.youtube.com/watch?v=gV-b1r7-N0Y

- Cory

Destroyer_1LE 05-11-2019 02:44 PM

2 Attachment(s)
Wheel Spec:
Front: Apex SM-10 18's 10.5 et22 with a 12mm spacer upfront with hub centric rings
Back: Apex SM-10 18's 10.5 et22 with hub centric ring

Tires:
Front and Back: Michelin Cup 2 Connects 295/30r18

You can also find more photos on my instagram @Destoryer_1LE
https://www.instagram.com/destroyer_1le/

I just realized I made a mistake in the video by saying 8mm hub centric spacer when its 12mm hub centric Spacer. When I say 3mm I really mean 5mm non hub centric spacer. Sorry for the mistake.

I put together a little video talking about the spec and fitment.
https://www.youtube.com/watch?v=9N5RF-4zn6w

Apex Wheels 05-15-2019 12:26 AM

Jason's lowered SS 1LE is sitting pretty on another set of our Camaro specific 19" ARC-8 wheels, this time in a staggered setup.

19x10" ET20 front wrapped in 285/35-19 Bridgestone RE71R
19x11" ET43 rear wrapped in 305/30-19 Bridgestone RE71R

https://live.staticflickr.com/65535/...5685a1fc_b.jpg
https://live.staticflickr.com/65535/...8ffa47c2_b.jpg
https://live.staticflickr.com/65535/...3b85a098_b.jpg
https://live.staticflickr.com/65535/...21e500a2_b.jpg

- Cory

Apex Wheels 07-22-2019 01:42 PM

Patrick's SS 1LE was tearing up the track a few weeks ago on our SM-10 wheels. Check out the specs and photos below.

19x10.5" ET22 in Satin Black
5mm spacer up front
305/30/19 Hankook Ventus RS4 Tires
Hub centric ring

https://live.staticflickr.com/65535/...c225f415_b.jpg
https://live.staticflickr.com/65535/...be7a0e33_b.jpg
https://live.staticflickr.com/65535/...0bd91df2_b.jpg

- Cory

Apex Wheels 08-14-2019 04:04 PM

Gary put his SS 1LE in stealth mode with a complete XPEL Satin wrap and is rocking our direct fitzx ARC-8 wheels anthracite, 19x10" ET20 squared wrapped in 285/35-19 Michelin Pilot Sport 4S tires.

https://live.staticflickr.com/65535/...dd9b2aab_b.jpg
https://live.staticflickr.com/65535/...150a689b_b.jpg
https://live.staticflickr.com/65535/...08667eb6_b.jpg

- Cory

TEST DRyVer 08-21-2019 12:36 AM

Quote:

Originally Posted by APEXRaceParts (Post 10360976)
At this point there are no plans for 20" wheels, mainly because there is no need for them. The factory wheels are unnecessarily large. 19" wheels clear all of the brake kits out there, offer better/more tire options, and have less wieght than their 20" counterparts which results in better performance

Hey There! I have a 2017 ZL1 that I purchased 2 months ago. It's time for wheels. I am cross-shopping a few different brands and setups, one of them is yours. I'm also specifically shopping 19's as of recent, but I've come across a problem in finding tires in the sizes I'm looking for. Above you stated there are more options for tires in 19', but I'm finding the opposite. Please guide me in where I need to look. I would like to run a thicker sidewall, 35 series instead of 30. Ride quality and less rotational weight would be my main factors in considering 19's over 20's. In our cars it seems that you can't run a 35 Series tire without rubbing (at least for certain. Some were successful, some were not). Ideally, I'd pick up a set of your wheels in 19×10 in the front, and 19x11 in the rear. I'd like to run 285/35/19 tires in the front and 305/35/19 tires in the rear. When I look up that fitment on tirerack, the only tires that pop up are Michellin Cup 2's (great tires as I've had them in the past, but not what I'm looking for in my daily ZL1). I know you guys love your squared setup, but that's just not for me. I can see the reason for a squared setup on my wife's F30 335i (which I personally did not opt for squared when buying wheels and tires for her car), but I really don't like the idea of squared for a 6th Gen. Any idea on sizing options for tires, and proper fitment for wheels? The EC-7 would likely be my choice, although pricing could sway me to ARC-8.

Apex Wheels 09-11-2019 11:37 AM

Quote:

Originally Posted by TEST DRyVer (Post 10601809)
Hey There! I have a 2017 ZL1 that I purchased 2 months ago. It's time for wheels. I am cross-shopping a few different brands and setups, one of them is yours. I'm also specifically shopping 19's as of recent, but I've come across a problem in finding tires in the sizes I'm looking for. Above you stated there are more options for tires in 19', but I'm finding the opposite. Please guide me in where I need to look. I would like to run a thicker sidewall, 35 series instead of 30. Ride quality and less rotational weight would be my main factors in considering 19's over 20's. In our cars it seems that you can't run a 35 Series tire without rubbing (at least for certain. Some were successful, some were not). Ideally, I'd pick up a set of your wheels in 19×10 in the front, and 19x11 in the rear. I'd like to run 285/35/19 tires in the front and 305/35/19 tires in the rear. When I look up that fitment on tirerack, the only tires that pop up are Michellin Cup 2's (great tires as I've had them in the past, but not what I'm looking for in my daily ZL1). I know you guys love your squared setup, but that's just not for me. I can see the reason for a squared setup on my wife's F30 335i (which I personally did not opt for squared when buying wheels and tires for her car), but I really don't like the idea of squared for a 6th Gen. Any idea on sizing options for tires, and proper fitment for wheels? The EC-7 would likely be my choice, although pricing could sway me to ARC-8.

Hello, thanks for the question! To clarify, the "more options" comment is in regards to performance tires in the 305/30-19 size. Bridgestone RE71R, Hankook RS4, Nitto NT01, Goodyear Supercar 3R, etc.

For someone such as yourself searching for more sidewall and ride comfort, 305/35-19 is the way to go but as you saw tire selection is quite limited. I would recommend the Nitto 555 G2 in this case.


All times are GMT -5. The time now is 02:00 AM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.