The front grille is too narrow to me. It throws off the whole design.
|
I like both the rear ends and both sets of tail lights. The overall shape has too much fifth gen in I for my taste with it being a sixth gen. Great job though.
|
Quote:
|
Doc,
Impressive work here! I think many people will have a very hard time looking at these basic renderings and getting past some of the "simple" shapes and envisioning what could be. For instance, the headlights/tail lights on 5A and 6A (which happens to be my favorite). Imagine those lights with fancy looking HID/LED features. Look at what GM did with the 14 Vette tails and apply that same type of thing to these tails and you could have something pretty cool. One thing that stands out in my mind, is the side view. The rendering makes the car look pretty fat/heavy. I think the belt line needs to be lower, and the roof needs to appear higher (not actually be higher) thus making the car look more trim, and lighter. I have some other thoughts, but pretty hard for me to put them into words lol. |
Quote:
|
2 Attachment(s)
OK...so I decided to have a little fun with your rendering Doc
1) Changed round fogs to angled ones and made the black housings slightly bigger...I think something angled up there with LEDs would look more modern than round, but don't really have anything against the round. 2) I made the "black" area of the lower front air dam shorter than the outward ends. Gives the front more character...and this is exactly what Chevy has done with the new Vette and the Impala, 3) The shaded areas just below the fogs, I changed the angle from flat to angled 4) Brought in the fender flares at the bottoms to show more tire 5) softened the angles of the hood a bit on the outside so you don't see the hard edges as well. 6) Cut off some of the tire length in the front shot...car just looks to high in originals. 7) Gave the head lights an outlined LED shape that I thought would look good with this design....not too hung up on that though. They could maybe be a tad bigger. In the rear I wasn't exactly sure what to do. I just felt like there was too much "white space" there, so I though a couple indentions in the body there would look good. Doesn't have to be vents...just something to add character. Also added more lines to the tail lights. Lowered the blacked out part between the tail lights for more character. I don't intend for you to add any of this into your design...these are just my opinions! |
your skills are great. I can definately see why you disliked the 14.
to me this is more of a Lotus, then a camaro. |
5 + 6a = WIN
|
1 Attachment(s)
OK...so guess I must be bored, cuz I took what I have above and changed the tail lights with some inspiration from this rendering below that I really like a lot. The lower and upper part would be illuminated when the brakes are not applied.
http://www.gminsidenews.com/forums/g...CamaroBack.jpg I swear I'm done now! Back to you DOC. |
Something's up with the profile.
Like the proportions between the greenhouse and rest of the car are off. It looks like the greenhouse is too small for the rest of the car. Great skills, but you need to push the design more. It looks too much like a 5th gen. Like you just put a new nose & tail on the existing car. |
|
Quote:
Maybe the front of this with the rear with the round tail lights would be better. |
Quote:
All kinds of radical, futuristic designs can be drawn but you still have to keep in mind that an engine, interior and people have to fit inside the shape. And the Camaro has to be a 4 seater otherwise you have a Vette. KM I really appreciate your positive feedback and efforts, that's exactly the type of response I was hoping would happen. Everyone... keep the ideas/feedback going and let me know what kind of feel you want the 6th gen to have; what kind of "look" are you looking for. |
Quote:
|
All times are GMT -5. The time now is 10:54 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.