[RPI Designs]

2016-2017 6th Generation Camaro ZL1 Inspired Side Rockers Skirts

Use code PHIL5 to get these lower prices!
Prime finish $379.99
Satin black $436.98
Painted body color finish $560.48
Hydro-Carbon fiber finish $607.98

These prices include shipping!
https://www.rpidesigns.com/shop/item...-zl1-inspired/

When it comes to adding body styling pieces to your 6th Gen Camaro you have a few options. RPI Designs is excited to offer these exclusive side skirts, manufactured in-house at RPI Designs. Our Camaro side skirts are built with pride in our Salem, Ohio manufacturing facility. These side rockers are inspired by the 2017 Camaro ZL1. We took the ZL1 Camaro look and created these with the ZL1 pieces in mind.

These pieces are made from fiberglass and are available in a few different options:
Prime finish
Satin black
Painted body color finish
Hydro-Carbon fiber finish

Sold as a set of two side skirts, these Camaro pieces will fit any SS, RS or LT. Prime and satin black finish typically ship within 48 hours. If you select a body color painted set or a hydro-carbon fiber set please allow additional time as these are painted to order. The below photos are shown on our shop Camaro SS with a satin black set of skirts and our SS-style front splitter installed.

Fitment: 2016, 2017 Camaro SS RS LT

Here are a few pictures. More are on the way!







https://www.rpidesigns.com/shop/item...-zl1-inspired/

[RPI Designs]

[keon718nyc]

Seems like a great price and looks really good! Now i am in between this and the ACS side rockers. I might have to lean this way due to the price painted is in my wallet range.

[RPI Designs]

Originally Posted by keon718nyc

Seems like a great price and looks really good! Now i am in between this and the ACS side rockers. I might have to lean this way due to the price painted is in my wallet range.

Thanks.
That has always been our goal for our accessories. Good quality at a fair price.

[megaphone]

Do I have to drill into my car to get these on?

[Obzen]

Would love to see pics of them off the car from a few angles. Curious what the back side/ attachment points look like.

[chozn4service]

I've sent a message on your the RPI site, how do these attach and what material are they made out of? I really like the way that they look and if I can see how they mount up, I may all over these....

[RPI Designs]

Originally Posted by megaphone

Do I have to drill into my car to get these on?

Yes, you will have to drill holes into the rockers on your car.

[RPI Designs]

Originally Posted by Obzen

Would love to see pics of them off the car from a few angles. Curious what the back side/ attachment points look like.

I will have to get you some pictures this afternoon. Right now all of the skirts are bare fiberglass and it is difficult to see the black holes on black fiberglass.

[RPI Designs]

Originally Posted by chozn4service

I've sent a message on your the RPI site, how do these attach and what material are they made out of? I really like the way that they look and if I can see how they mount up, I may all over these....

The skirts are made of fiberglass and are held on with screws. I will post some pictures of the back side of the skirts this afternoon. The holes should show up better with gray primer on them. Right now it is too hard to get pictures of black holes drilled into black fiberglass.

[RPI Designs]

Originally Posted by Obzen

Would love to see pics of them off the car from a few angles. Curious what the back side/ attachment points look like.

Got these pictures this am before they started painting this set of skirts.

[chozn4service]

I got a call this morning from Don at RPI and he explained in a voicemail how the skirts are installed. I gave him a ring back this afternoon and he further answered questions that I had on the installation.
I was having a hard time picturing how they butted up against the body, plumb or flush and not have a gap or pull away. His explanation along with the pictures posted have really helped this 60yr old brain. LL Needless to say I went ahead and pulled the trigger on these skirts.

I've ordered from RPI on at least 4-5 other occasions and I've always been satisfied with the fit, finish and the paint quality on things I've ordered for my 5th Gen's and I know these skirts will really enhance my program. Can someone say 'Eye Candy'?

Thanks Don and looking forward to seeing those skirts on my porch soon and on my car. I'll definitely post up some pics with them installed. Just hope we get some get installation whether after I ceramic coat them so they'll be coated like the rest of the car.....

[RPI Designs]

Originally Posted by chozn4service

I got a call this morning from Don at RPI and he explained in a voicemail how the skirts are installed. I gave him a ring back this afternoon and he further answered questions that I had on the installation.
I was having a hard time picturing how they butted up against the body, plumb or flush and not have a gap or pull away. His explanation along with the pictures posted have really helped this 60yr old brain. LL Needless to say I went ahead and pulled the trigger on these skirts.

I've ordered from RPI on at least 4-5 other occasions and I've always been satisfied with the fit, finish and the paint quality on things I've ordered for my 5th Gen's and I know these skirts will really enhance my program. Can someone say 'Eye Candy'?

Thanks Don and looking forward to seeing those skirts on my porch soon and on my car. I'll definitely post up some pics with them installed. Just hope we get some get installation whether after I ceramic coat them so they'll be coated like the rest of the car.....

Thanks for the order!

[RPI Designs]

We just posted our install video for these skirts to youtube.