12-15-2017, 09:38 AM | #1 |
Drives: 2017 camaro SS 1LE Join Date: Jan 2017
Location: North Carolina
Posts: 159
|
Harness Bar for 5 point harnesses
There are only two places I have been able to find a pre-fabricated harness bar specifically made for the 6th gen Camaro. Both places charge $626.85 before shipping. Braum and corbeu both have one for the 5th gen but not the 6th gen. I ordered their universal one and it didn't quite fit but I made it work. The Braum one was only $199.95. If you want to check it out then the video is below.
https://youtu.be/s-M2Z1taW94
__________________
2017 1000+hp Camaro SS
88/96 single turbo manual to TH400 swap 15" conversion Port injection 22K+ followers on Instagram @Sixgunsled 6.4K subscribers YouTube: Sixgunsled |
12-15-2017, 07:25 PM | #2 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
I have a 6 pt roll bar that just came in today from RPM Rollbars. Its Chromoly
http://rpmrollbar.com/wp-content/uploads/rpm_ss.jpg
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
01-11-2018, 03:02 PM | #3 | |
Drives: 16 Camaro 2LT RS Join Date: Apr 2016
Location: Tucson, Arizona
Posts: 44
|
Quote:
__________________
2016 2LT RS, A8, Borla ATAK Axle-back
|
|
01-12-2018, 06:26 AM | #4 |
Chin Event Manager
Drives: 2018 SS 1LE Join Date: Dec 2011
Location: Bradenton FL
Posts: 50
|
Did the seat brackets ever come in so you could see if this will actually work?
__________________
Jim Pomroy
Chin Track Days Chief Instructor and Event Manager 2018 1LE 2015 Mustang GTPP 2011 Duramax Access to several Chin track cars... |
|
|
Post Reply
|
|
|