05-20-2016, 03:29 PM | #15 |
ultracrepidarianism
Drives: '14 1SS/RS/1LE/NPP '18 Accord Sport Join Date: Mar 2014
Location: where folks drive like shit
Posts: 1,297
|
bought mine from gmpartsdirect. arrived flat in bubble wrap. still have the passenger side and original box with instructions/template. only wanted the driver side.
__________________
|
05-20-2016, 04:33 PM | #16 |
Drives: 2013 Camaro Dusk 2SS/6 Join Date: Sep 2013
Location: New Jersey
Posts: 1,586
|
looks good to me except for the bubbles. if you rotate the rear stripe clockwise a smidge, it might be perfect!
with the bubbles there I don't think too highly of the installer. |
05-21-2016, 10:45 AM | #17 |
|
Bubbles are no big deal, easy to get rid of and usually they'll just bleed through all by themselves in a couple of days. That being said.. on a decal that small, you would actually have to work hard to get bubbles.
|
05-26-2016, 03:17 PM | #18 |
Bully Proof
|
Honestly...from the pictures it looks like your installer really screwed up the job. It appears to me that there is a millimeter (or 2 or 3) more space between the bottom of the stripes than there is between the top of the stripes...which would account for the right stripe not reaching the wheel well body line like it is supposed too. That along with the air bubbles pretty much has botched job written all over it.
__________________
|
05-31-2016, 09:10 AM | #19 | |
Drives: 2010 Camaro SGM 1LT M6 Join Date: Jan 2015
Location: Rochester, NY
Posts: 1,630
|
Quote:
But it doesn't matter now because I had a local shop (not the original installer) recreate them and cut them and they turned out perfect. Ended up costing me another $100 but I'm 100% happier with them.
__________________
Arkentect's Build Thread!! - UPSTATE C5 MEMBER
2010 SGM M6 1LT - SOLD Current - 2009 C6 Corvette Z51 |
|
|
|
|
|