replace quarter panel quote - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

2010_camaro · 01-26-2014, 11:59 AM

What's an average price to replace a quarter panel on one these cars?

rontammy0 · 01-26-2014, 12:26 PM

Im not sure but be certain you get a price that is for a gm factory replacement panel. These are called service parts when they are stamped on the line.

2010_camaro · 01-26-2014, 12:31 PM

I will take nothing less but GM OEM parts right from the dealer. I pay my insurance to cover me not half ass put my car back together. Hopin its totaled.

NC-V · 01-26-2014, 12:49 PM

We replaced a 1/4 a little while back on one. All I remember is the total (around $5500 I believe,) but that included a wheel/tire, some suspension pieces, frame pull time, trunk time, rear bumper and some other little pieces. The entire outer quarter skin (side of the car basically) ran about $650 I think, from GM. That was almost a year ago though and I don't have the quote in front of me so the numbers may be off a bit.

2010_camaro · 01-26-2014, 01:09 PM

Well i need both rims two tires front and rear bumper fender hood door and front suspension (no clue what all needs replaced. Its shoved into the wheel well.) And maybe rear suspension. Wheel took a good hit.

I'd rather it be totalled cause with all that work I don't want the car back.

bannonm · 01-26-2014, 05:09 PM

Well just make sure the shop that does the work follows the GM manual for replacing the quarter panel. There's a section in the service manual that goes into detail on where to cut, weld, etc.

spyderbuddy · 01-26-2014, 05:16 PM

Mine was almost 4 grand

2010_camaro · 01-26-2014, 08:10 PM

My insurance won't want to put oem parts back on. I know how they are.

CamaroRyan · 01-27-2014, 07:00 AM

Ironically i just Replaced my Entire Quarter Panel.

They happen to have a quarter panel off another camaro already at the shop. (not sure if that factored into the price).

With labor and everything it cost around $2,200

City Tree fell on my car. Thank god they picked up the tab.

Although my Gas Cap isnt completly "flush" anymore which im pissed about (but that another story lol)

nUcLeArEnVoY · 01-27-2014, 07:44 AM

Quarter panel is no joke, man. Takes up a big part of the car. Mine cost me $1,000 to do a small spot repair of body color and then just reclear the whole panel. I can only imagine what it costs to replace one.

sandhu.varin@gmail.com · 03-13-2015, 10:02 AM

HI Guys ,
I got my Camaro hit on rear quarter panel and when i told my insurance provider geico so have send to body shop and body shop told that they will repair the quarter panel .So just want to know will it looks like the same once repaired or it won't get the same finishing as it comes when from OEM

ELIC1 · 03-13-2015, 12:10 PM

can you take better pic so we can see it why upside down.

myold88 · 03-13-2015, 03:50 PM

Quote:

Originally Posted by sandhu.varin@gmail.com

HI Guys ,
I got my Camaro hit on rear quarter panel and when i told my insurance provider geico so have send to body shop and body shop told that they will repair the quarter panel .So just want to know will it looks like the same once repaired or it won't get the same finishing as it comes when from OEM

What

01-26-2014, 11:59 AM	#1
2010_camaro Drives: 2014 Camaro SS Join Date: May 2011 Location: Florence, KY Posts: 2,238 View My Garage	replace quarter panel quote What's an average price to replace a quarter panel on one these cars? __________________ MODS 6.0 forged iron block, TH400, B&M shifter, DSS axles & driveshaft, Viking / BMR suspension, Full custom fuel system with cell, Twin 76mm teriyaki tornados on 24lbs. https://www.instagram.com/whoopa_ss/

01-26-2014, 12:31 PM	#3
2010_camaro Drives: 2014 Camaro SS Join Date: May 2011 Location: Florence, KY Posts: 2,238 View My Garage	I will take nothing less but GM OEM parts right from the dealer. I pay my insurance to cover me not half ass put my car back together. Hopin its totaled. __________________ MODS 6.0 forged iron block, TH400, B&M shifter, DSS axles & driveshaft, Viking / BMR suspension, Full custom fuel system with cell, Twin 76mm teriyaki tornados on 24lbs. https://www.instagram.com/whoopa_ss/

01-26-2014, 12:49 PM	#4
NC-V Drives: cts-v Join Date: Dec 2011 Location: Mooresville, NC Posts: 506	We replaced a 1/4 a little while back on one. All I remember is the total (around $5500 I believe,) but that included a wheel/tire, some suspension pieces, frame pull time, trunk time, rear bumper and some other little pieces. The entire outer quarter skin (side of the car basically) ran about $650 I think, from GM. That was almost a year ago though and I don't have the quote in front of me so the numbers may be off a bit. __________________ S.L. Customs www.slcustomsonline.com www.facebook.com/S.L.CustomsLLC

01-26-2014, 01:09 PM	#5
2010_camaro Drives: 2014 Camaro SS Join Date: May 2011 Location: Florence, KY Posts: 2,238 View My Garage	Well i need both rims two tires front and rear bumper fender hood door and front suspension (no clue what all needs replaced. Its shoved into the wheel well.) And maybe rear suspension. Wheel took a good hit. I'd rather it be totalled cause with all that work I don't want the car back. __________________ MODS 6.0 forged iron block, TH400, B&M shifter, DSS axles & driveshaft, Viking / BMR suspension, Full custom fuel system with cell, Twin 76mm teriyaki tornados on 24lbs. https://www.instagram.com/whoopa_ss/

01-26-2014, 05:09 PM	#6
bannonm Drives: 2011 2SS/RS M6 VR Join Date: Aug 2011 Location: Chicagoland Posts: 1,536	Well just make sure the shop that does the work follows the GM manual for replacing the quarter panel. There's a section in the service manual that goes into detail on where to cut, weld, etc. __________________

01-26-2014, 12:26 PM	#2
rontammy0 Account Suspended Drives: 2011 2SS/ RS INFERNO ORANGE L99 Join Date: Dec 2012 Location: Alliston Ontario Canada Posts: 9,057 View My Garage	Im not sure but be certain you get a price that is for a gm factory replacement panel. These are called service parts when they are stamped on the line.

01-26-2014, 05:16 PM	#7
spyderbuddy Drives: 2010 RS Inferno Orange Metallic Join Date: Mar 2010 Location: Albany, Ga. Posts: 3,398 View My Garage	Mine was almost 4 grand Attached Images __________________ PCP Hideaway Headlight Covers, BBK Headers & High Flow Cats, ZL1 Add-ons Wicker Bill, TL1/ZL1 Hood Insert, Gen5 DIY Frameless Mirror, ABL Dash Lighting an My link Navigation, Blacked out Rear Bowtie, all Sylvania led Turn Signals, Ceramic Window Tint By Nicks, MBRP Exhaust tips, GEN5 DIY Virginia Legal DRL Harness, Painted Brake Calipers, Vittesse Throttle Controller, Heritage Grill, Diode Dynamics Led Lighting, Manual Shifter Boot, Paddle Shifters, CNC Throttle Body, Trifecta Tune, RX Catch Can & Breather, Trunk Black out and Side Grills, Chevorlet door Sills.

01-26-2014, 08:10 PM	#8
2010_camaro Drives: 2014 Camaro SS Join Date: May 2011 Location: Florence, KY Posts: 2,238 View My Garage	My insurance won't want to put oem parts back on. I know how they are. __________________ MODS 6.0 forged iron block, TH400, B&M shifter, DSS axles & driveshaft, Viking / BMR suspension, Full custom fuel system with cell, Twin 76mm teriyaki tornados on 24lbs. https://www.instagram.com/whoopa_ss/

01-27-2014, 07:00 AM	#9
CamaroRyan Drives: 11' Camaro LS (Black) Join Date: Feb 2013 Location: MIA Posts: 61	Ironically i just Replaced my Entire Quarter Panel. They happen to have a quarter panel off another camaro already at the shop. (not sure if that factored into the price). With labor and everything it cost around $2,200 City Tree fell on my car. Thank god they picked up the tab. Although my Gas Cap isnt completly "flush" anymore which im pissed about (but that another story lol)

01-27-2014, 07:44 AM	#10
nUcLeArEnVoY Oldbie that nobody knows Drives: 2011 1SS/RS M6 Join Date: Jun 2008 Location: Homestead, FL Posts: 3,459 View My Garage	Quarter panel is no joke, man. Takes up a big part of the car. Mine cost me $1,000 to do a small spot repair of body color and then just reclear the whole panel. I can only imagine what it costs to replace one.

03-13-2015, 10:02 AM	#11
sandhu.varin@gmail.com Drives: Camaro 2012 Join Date: Mar 2015 Location: Baltimore Posts: 2	HI Guys , I got my Camaro hit on rear quarter panel and when i told my insurance provider geico so have send to body shop and body shop told that they will repair the quarter panel .So just want to know will it looks like the same once repaired or it won't get the same finishing as it comes when from OEM Attached Images Last edited by sandhu.varin@gmail.com; 03-13-2015 at 10:08 AM. Reason: Pics..

03-13-2015, 12:10 PM	#12
ELIC1 Account Suspended Drives: black and silver Join Date: Apr 2014 Location: new york Posts: 1,728	can you take better pic so we can see it why upside down.