02-17-2013, 08:15 PM | #1 |
WICKDSS
Drives: 2011 1SS/RS IOM LS3 Join Date: May 2010
Location: Wichita, Kansas
Posts: 1,111
|
Finally Mounted my 17" Weld RTS
Just wanted to throw a few pics up of the 17" Welds with the M&H Racemaster tires on the SS. Weight savings over my F14's is around 75 lbs. The wheels are 17x10 and 17x5. Tires are 325/45/17 DRs and 17x4.5 DOT bias ply front runners. Can't wait to try these out!
__________________
2011 IOM SS/RS, M6. Look up our all generation Camaro club website at Heartland Camaros
Gforce Engineering Drivetrain, ECS 1500 Supercharger, TSP Cam, Alky Controls Meth single nozzle. 91 octane, 698 RWHP 625 rwtq. 4200#+, Tuned by Justin "Justune" Kalwei 11.57 @ 126.8 mph with a crappy 1.80 60'.....still learning to drive....M&H DR's and skinnies on 17" Welds. |
02-17-2013, 08:27 PM | #2 |
|
Looks completely awesome!!! Congratulations!!! That's the one thing I regret about my car.....selling my Welds!!! Oh well....live and learn....someday I'll get another set.
|
02-17-2013, 08:40 PM | #3 |
Drives: 2010 Camaro SS M6 Join Date: Dec 2012
Location: Palm Springs, CA
Posts: 131
|
|
02-17-2013, 08:43 PM | #4 |
Very nice, looks sharp!
|
|
02-17-2013, 08:46 PM | #5 |
Drives: none Join Date: Aug 2011
Location: DFW area
Posts: 1,844
|
Stock ride height? Looks lower a bit?
28" tall front bias plys? |
02-17-2013, 08:49 PM | #6 |
Account Suspended
Drives: 2010 Camaro Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 11,927
|
|
02-17-2013, 08:51 PM | #7 |
Drives: none Join Date: Aug 2011
Location: DFW area
Posts: 1,844
|
You're right, it is.
|
02-17-2013, 08:54 PM | #8 |
Account Suspended
Drives: 2010 2SS/RS Join Date: Jan 2013
Location: Texas
Posts: 1,050
|
Very nice !! They fit over brembos?
|
02-17-2013, 08:55 PM | #9 |
Account Suspended
Drives: 2010 Camaro Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 11,927
|
|
02-17-2013, 08:55 PM | #10 |
Account Suspended
Drives: 2010 Camaro Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 11,927
|
|
02-17-2013, 09:03 PM | #11 |
WICKDSS
Drives: 2011 1SS/RS IOM LS3 Join Date: May 2010
Location: Wichita, Kansas
Posts: 1,111
|
They fit the brembos great, and tight!
__________________
2011 IOM SS/RS, M6. Look up our all generation Camaro club website at Heartland Camaros
Gforce Engineering Drivetrain, ECS 1500 Supercharger, TSP Cam, Alky Controls Meth single nozzle. 91 octane, 698 RWHP 625 rwtq. 4200#+, Tuned by Justin "Justune" Kalwei 11.57 @ 126.8 mph with a crappy 1.80 60'.....still learning to drive....M&H DR's and skinnies on 17" Welds. |
02-17-2013, 09:03 PM | #12 |
WICKDSS
Drives: 2011 1SS/RS IOM LS3 Join Date: May 2010
Location: Wichita, Kansas
Posts: 1,111
|
1" lowered front and back.
__________________
2011 IOM SS/RS, M6. Look up our all generation Camaro club website at Heartland Camaros
Gforce Engineering Drivetrain, ECS 1500 Supercharger, TSP Cam, Alky Controls Meth single nozzle. 91 octane, 698 RWHP 625 rwtq. 4200#+, Tuned by Justin "Justune" Kalwei 11.57 @ 126.8 mph with a crappy 1.80 60'.....still learning to drive....M&H DR's and skinnies on 17" Welds. |
02-17-2013, 09:05 PM | #13 |
|
Looks good!!!!!
__________________
Sit Back and Enjoy The Ride!!
|
02-17-2013, 09:06 PM | #14 |
Drives: none Join Date: Aug 2011
Location: DFW area
Posts: 1,844
|
|
|
|
Tags |
17", m&h, rts, weld |
|
|