You are browsing camaro6 
09-23-2017, 04:08 PM
|
#1 |
        
Drives: 2021 LT1 10 speed auto Join Date: May 2013
Location: Connecticut
Posts: 2,343
|
left side high beam way off
Anyone have a left side high beam that is aimed very high? Headlights are aimed correctly, look like the high beam bulb on the left side is angled up compared to the right. Put the car with in 4 feet of a white garage door , headlights on, both low beam (outer magnifier lenses) are perfectly aligned, switch to high beam, low beams still perfectly aligned but left high beam much higher on the door that the right. I removed and reinstalled the twist in bulb and socket to make sure it was seated correctly, it was and is correct. Maybe the left headlamp high beam section where the bulb mounts is not made correct or straight??
|
|
|
|
09-23-2017, 04:40 PM
|
#2 |
 
Drives: 2016 Camaro 2SS Join Date: Mar 2017
Location: PA
Posts: 132
|
mine is the same. I see it as an added feature.
__________________
Traded-2017 1LT V6 GMPP Intake, Flowmaster American Thunder axle-back, Vmax Ported throttle body, ZL1/1LE sway bars, V6 1LE Suspension,SEMA grille, Blade spoiler, Apex PS-7 18x10
|
|
|
|
|
09-23-2017, 08:51 PM
|
#3 |
|
Drives: 2024 Riverside Blue 2SS 1LE Join Date: Mar 2016
Location: Fort Wayne, IN
Posts: 1,208
|
I read somewhere they did this on purpose. Something about the right lens aimed at the side of the road and the left is aimed not to cross into the other lane.
|
|
|
|
|
09-24-2017, 11:16 AM
|
#4 |
 Drives: 2018 Summit white 2SS 1LE Join Date: Nov 2016
Location: Michigan
Posts: 56
|
They are adjustable. Take a look in the owners manual it probably tells you how. Should take about 2 minutes.
|
|
|
|
|
09-24-2017, 07:13 PM
|
#5 | |
|
Drives: 2021 LT1 10 speed auto Join Date: May 2013
Location: Connecticut
Posts: 2,343
|
Quote:
|
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
