07-25-2017, 07:41 AM | #15 | |
|
Quote:
Boom! 26" club Hookin and bookin!
__________________
|
|
07-26-2017, 05:09 PM | #16 | |
Drives: 2016 1SS A8 Camaro with MRC and NPP Join Date: Oct 2016
Location: New Jersey Shore
Posts: 149
|
Quote:
I currently am running a 305/40/R18 in the rear (almost 29 inch a bit too tall) running stock front wheels/tires and want to switch to a setup just like yours for the track. But before I drop the $$$$ I had a few questions and not many 6th gen guys have used this setup yet. I was wondering if I would have to get the TCM tweaked again or else it will be having issues with torque management, shift points, power reduction/Throttle closure, ABS issues or any other issues that will limit the car at the track? Also what kind of time improvements have you seen from this setup and do you think I'll have traction issues at 550 rwhp? Thanks, -Jon
__________________
2016 HB Camaro 1SS A8 with MRC and NPP 398rwhp/389tq stock #s(11.84 @ 117 DR only, ECS boost 550rwhp/510tq (dynapack #s) , same boost + AEM water/meth + ARH Headers/mids 600 rwhp+ (dynojet #s) TTP)10.8 @ 129.
2020 Ford Explorer 2003 SVT Cobra Coupe (just your average KB Terminator Cobra). 2013 Focus ST (e30 Tuned). 2004 Dodge 3500 Cummins Dually 6 spd manual (tow rig). 1997 Jeep Cherokee (Lifted and Locked XJ off-road rig). Last edited by RageWorx; 07-26-2017 at 05:41 PM. |
|
07-28-2017, 01:31 PM | #17 | |
Drives: 2011 2SS/RS & 2017 1SS Join Date: Apr 2011
Location: Maryland
Posts: 1,960
|
Quote:
Traction issue depends on the track. Your power level should be no problem, but track prep is very different everywhere.
__________________
2011 Chevrolet Camaro 2SS/RS L99 (1 of 782)
10.78 @125mph ALL MOTOR SBE Built/Tuned by Me 2017 Chevrolet Camaro 1SS Auto 9.29 @144.57mph ALL MOTOR SBE #TEAMGPI Gwatney Performance Innovation |
|
07-28-2017, 01:56 PM | #18 | |
Drives: 2016 1SS A8 Camaro with MRC and NPP Join Date: Oct 2016
Location: New Jersey Shore
Posts: 149
|
Quote:
-Jon
__________________
2016 HB Camaro 1SS A8 with MRC and NPP 398rwhp/389tq stock #s(11.84 @ 117 DR only, ECS boost 550rwhp/510tq (dynapack #s) , same boost + AEM water/meth + ARH Headers/mids 600 rwhp+ (dynojet #s) TTP)10.8 @ 129.
2020 Ford Explorer 2003 SVT Cobra Coupe (just your average KB Terminator Cobra). 2013 Focus ST (e30 Tuned). 2004 Dodge 3500 Cummins Dually 6 spd manual (tow rig). 1997 Jeep Cherokee (Lifted and Locked XJ off-road rig). |
|
07-28-2017, 05:44 PM | #19 | |
|
Quote:
OP with the M6 gearing I want 26" too. I am so tempted. It's just a PIA to swap all 4 tires in my garage. But then I do have a Rav4 beater. Do you drive to the track in that setup?
__________________
"Democracy Dies in Darkness" |
|
08-22-2017, 08:52 AM | #20 |
Drives: 2016 1SS A8 Camaro with MRC and NPP Join Date: Oct 2016
Location: New Jersey Shore
Posts: 149
|
Could someone please post up the correct Race Star part numbers for the wheel setup the OP showed off in Grey as there are so many variations and I want to make sure I'm getting the correct wheels for my 2016 SS plus I'm ready to purchase.
Also what else will be needed for me to bolt these on (lug kit and etc ?). Thanks, -Jon
__________________
2016 HB Camaro 1SS A8 with MRC and NPP 398rwhp/389tq stock #s(11.84 @ 117 DR only, ECS boost 550rwhp/510tq (dynapack #s) , same boost + AEM water/meth + ARH Headers/mids 600 rwhp+ (dynojet #s) TTP)10.8 @ 129.
2020 Ford Explorer 2003 SVT Cobra Coupe (just your average KB Terminator Cobra). 2013 Focus ST (e30 Tuned). 2004 Dodge 3500 Cummins Dually 6 spd manual (tow rig). 1997 Jeep Cherokee (Lifted and Locked XJ off-road rig). |
08-23-2017, 02:19 PM | #21 |
[COTW 1/6/14]
Drives: 2017 1LE Join Date: Mar 2012
Location: Scott AFB/STL
Posts: 2,004
|
im still trying to figure out what will fit my 6 piston brakes lol
|
08-25-2017, 12:27 PM | #22 |
Drives: . Join Date: Jan 2017
Location: .
Posts: 508
|
I can't get a solid answer on that either. I just want to know what wheel size fits the rear. Are the SS and 1LE rears same caliper AND rotor size? I have seen mention the calipers are the same but are the rotors the same? I'm hoping to go 17" but want to know if anyone with 1LE has done so. And please bear with me I'm an evolving noob!
|
08-25-2017, 01:12 PM | #23 |
Drives: 66 Chevelle SS Join Date: Mar 2013
Location: SoCal
Posts: 1,347
|
You will find that the 26" tire is too short. Going to be very hard to hook with that.
__________________
66 Chevelle SS 396
91 octane Driver n/a 6.44@105.78 1/8th mile |
08-25-2017, 01:50 PM | #24 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,808
|
I have Race stars on my 4th gen and love them but I would go welds on the 6g.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
08-29-2017, 08:05 PM | #25 |
Drives: 1987 Buick Grand National Join Date: Mar 2016
Location: Mass
Posts: 149
|
Just what I want. What backspacing? Sorry if I missed it.
|
08-30-2017, 08:01 AM | #26 |
Drives: 14 Silverado LTZ Z71, 16 Camaro SS Join Date: Nov 2009
Location: Jackson, Michigan
Posts: 4,407
|
|
|
|
Post Reply
|
|
|