Recommended Tire Sizes for 2010 Camaro - Page 24 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

wyatt 390 · 03-30-2018, 09:35 AM

What’s the widest tire I can put on my stock 2014 ss rear rim. Thanks

spyderbuddy · 03-30-2018, 11:39 AM

275 40 20's on Front
315 35 20's on back

All stock rims

wyatt 390 · 04-02-2018, 11:45 AM

my tire guy said he wont put a 315 on a 9 inch rim claims that's what my stock rim is any thoughts or should I find a new place to go

sixty9fordkiller · 04-02-2018, 11:50 AM

Quote:

Originally Posted by wyatt 390

my tire guy said he wont put a 315 on a 9 inch rim claims that's what my stock rim is any thoughts or should I find a new place to go

Is your car a 1LE or ZL1?

Sent from my SM-G965U using Tapatalk

etlreams · 04-02-2018, 02:22 PM

Ok. I am thoroughly confused and frustrated. I see the fitment guide on the first page, but I am getting conflicting opinions and info from three different installers.

I have a 2013 2LT/RS convertible. I recently put Z28 replicas wheels on. Front is 20x9 and rear is 20x10.

I put the original 245/45-20 front and 275/40-20 rear tire back on and the fit looks horrible. Rounded top edges make it look like they are stretching to fit.

Wanted to switch to 275/40-20 in front and 305/35-20 rear tires, but installers are saying their data shows that is not a good fit.

Suggestions?....

sixty9fordkiller · 04-02-2018, 02:33 PM

wihout taking offset into consideration and EXCLUSIVELY talking about width:

the 275 40s will fit on the front 9" wheels you are installing. The factory RS wheels are 9" wide in the rear and they use that exact size so youre good there

i cannot say for sure that you can go 305 on a 10" wide wheel but that doesnt mean anything. You may have to search these forums unless you want to bew a pioneer

Another mamber and i are running 335 30s in the rear on 11" wide wheels and i think we're the only ones that i know of on here. Everyone else swears 315 was the max but ive had mine on for almost a year with no issues or rubbing at all

sixty9fordkiller · 04-02-2018, 03:01 PM

mickey thompsons 305 35 20 ET Streets

recommended wheel width 10" - 12" wheel. 11" preferred

http://www.mickeythompsontires.com/d.../et-street-s-s

John_C · 04-02-2018, 03:55 PM

Got to watch those sidewalls on slicks, etc!

InfernoB · 04-02-2018, 06:05 PM

Quote:

Originally Posted by sixty9fordkiller

wihout taking offset into consideration and EXCLUSIVELY talking about width:

the 275 40s will fit on the front 9" wheels you are installing. The factory RS wheels are 9" wide in the rear and they use that exact size so youre good there

i cannot say for sure that you can go 305 on a 10" wide wheel but that doesnt mean anything. You may have to search these forums unless you want to bew a pioneer

Another mamber and i are running 335 30s in the rear on 11" wide wheels and i think we're the only ones that i know of on here. Everyone else swears 315 was the max but ive had mine on for almost a year with no issues or rubbing at all

Any good picks of the 335/30/20 tires from the rear and sides? What Specific Make and Modwl tiresbdid you go with in the 335s?

MyLocalDJ · 04-03-2018, 08:14 AM

Quote:

Originally Posted by wyatt 390

my tire guy said he wont put a 315 on a 9 inch rim claims that's what my stock rim is any thoughts or should I find a new place to go

*******************************
I am running 315/35R20 on 10" wheels. I would not want to go with a wider tire or a narrower rim. I think it would make the tires would bow. Even with the 315s, I generally have to run higher than normal air pressure to keep the sidewalls from bulging and to make the ride feel right. At regular pressure, the tires feel a little squirrely. Personally, I would not go 315 on a 9" rim.

MyLocalDJ · 04-03-2018, 08:18 AM

Quote:

Originally Posted by etlreams

Ok. I am thoroughly confused and frustrated. I see the fitment guide on the first page, but I am getting conflicting opinions and info from three different installers.

I have a 2013 2LT/RS convertible. I recently put Z28 replicas wheels on. Front is 20x9 and rear is 20x10.

I put the original 245/45-20 front and 275/40-20 rear tire back on and the fit looks horrible. Rounded top edges make it look like they are stretching to fit.

Wanted to switch to 275/40-20 in front and 305/35-20 rear tires, but installers are saying their data shows that is not a good fit.

Suggestions?....

**************************

You can do 315s on a 10" rim. See my pics above.

etlreams · 04-04-2018, 12:03 AM

I'm going with 275/40s on front and 305/35s on rear. It is at the upper fittment spectrom of the 20x9 and 20x10 rims, but i am hoping it will look much better than the current 245 and 275 that appear to be "stretched" now.

Going with Nitto 555 G2 tires. Here's to hoping i made the right caĺl.

sixty9fordkiller · 04-04-2018, 02:05 AM

Quote:

Originally Posted by InfernoB

Any good picks of the 335/30/20 tires from the rear and sides? What Specific Make and Modwl tiresbdid you go with in the 335s?

Michelin pilot super sport

Sent from my SM-G965U using Tapatalk

wyatt 390 · 04-04-2018, 09:55 PM

Ok. Went to a different tire shop. He measured my rims. Best we can tell they are 9.5 or 10. They are new takeoffs from a 16 ss Mind you I have tires on so didn’t get a exact measurement. He said 315 would be the max he would feel safe putting on them so I think I am going for it

03-30-2018, 11:39 AM	#324
spyderbuddy Drives: 2010 RS Inferno Orange Metallic Join Date: Mar 2010 Location: Albany, Ga. Posts: 3,398 View My Garage	275 40 20's on Front 315 35 20's on back All stock rims Attached Images __________________ PCP Hideaway Headlight Covers, BBK Headers & High Flow Cats, ZL1 Add-ons Wicker Bill, TL1/ZL1 Hood Insert, Gen5 DIY Frameless Mirror, ABL Dash Lighting an My link Navigation, Blacked out Rear Bowtie, all Sylvania led Turn Signals, Ceramic Window Tint By Nicks, MBRP Exhaust tips, GEN5 DIY Virginia Legal DRL Harness, Painted Brake Calipers, Vittesse Throttle Controller, Heritage Grill, Diode Dynamics Led Lighting, Manual Shifter Boot, Paddle Shifters, CNC Throttle Body, Trifecta Tune, RX Catch Can & Breather, Trunk Black out and Side Grills, Chevorlet door Sills.

04-02-2018, 02:33 PM	#328
sixty9fordkiller Donkey Dick Cam Camaro Drives: 2010 2SS/RS LS3 M6 Join Date: Oct 2009 Location: Los Angeles, CA Posts: 1,998	wihout taking offset into consideration and EXCLUSIVELY talking about width: the 275 40s will fit on the front 9" wheels you are installing. The factory RS wheels are 9" wide in the rear and they use that exact size so youre good there i cannot say for sure that you can go 305 on a 10" wide wheel but that doesnt mean anything. You may have to search these forums unless you want to bew a pioneer Another mamber and i are running 335 30s in the rear on 11" wide wheels and i think we're the only ones that i know of on here. Everyone else swears 315 was the max but ive had mine on for almost a year with no issues or rubbing at all __________________ Bone Stock

04-02-2018, 03:01 PM	#329
sixty9fordkiller Donkey Dick Cam Camaro Drives: 2010 2SS/RS LS3 M6 Join Date: Oct 2009 Location: Los Angeles, CA Posts: 1,998	mickey thompsons 305 35 20 ET Streets recommended wheel width 10" - 12" wheel. 11" preferred http://www.mickeythompsontires.com/d.../et-street-s-s __________________ Bone Stock

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAMARO WIKI	Tran	Wiki	66	04-22-2024 11:41 AM
Drag Racing Suspension Kits	Info@PeddersUSA.com	Suspension / Chassis / Brakes	25	02-21-2010 08:48 PM
The Camaro, what it has come to mean for me	Number 3	5th Gen Camaro SS LS LT General Discussions	23	04-13-2009 09:31 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 06:56 PM

03-30-2018, 09:35 AM	#323
wyatt 390 Drives: 2018 SS Join Date: Jul 2017 Location: minnesota Posts: 168	What’s the widest tire I can put on my stock 2014 ss rear rim. Thanks

04-02-2018, 11:45 AM	#325
wyatt 390 Drives: 2018 SS Join Date: Jul 2017 Location: minnesota Posts: 168	my tire guy said he wont put a 315 on a 9 inch rim claims that's what my stock rim is any thoughts or should I find a new place to go

04-02-2018, 02:22 PM	#327
etlreams Drives: 2013 LT2 RS Vert Join Date: Jul 2017 Location: Minneapolis Posts: 34	Ok. I am thoroughly confused and frustrated. I see the fitment guide on the first page, but I am getting conflicting opinions and info from three different installers. I have a 2013 2LT/RS convertible. I recently put Z28 replicas wheels on. Front is 20x9 and rear is 20x10. I put the original 245/45-20 front and 275/40-20 rear tire back on and the fit looks horrible. Rounded top edges make it look like they are stretching to fit. Wanted to switch to 275/40-20 in front and 305/35-20 rear tires, but installers are saying their data shows that is not a good fit. Suggestions?....

04-04-2018, 12:03 AM	#334
etlreams Drives: 2013 LT2 RS Vert Join Date: Jul 2017 Location: Minneapolis Posts: 34	I'm going with 275/40s on front and 305/35s on rear. It is at the upper fittment spectrom of the 20x9 and 20x10 rims, but i am hoping it will look much better than the current 245 and 275 that appear to be "stretched" now. Going with Nitto 555 G2 tires. Here's to hoping i made the right caĺl.

04-04-2018, 09:55 PM	#336
wyatt 390 Drives: 2018 SS Join Date: Jul 2017 Location: minnesota Posts: 168	Ok. Went to a different tire shop. He measured my rims. Best we can tell they are 9.5 or 10. They are new takeoffs from a 16 ss Mind you I have tires on so didn’t get a exact measurement. He said 315 would be the max he would feel safe putting on them so I think I am going for it