Atlanta Club Lounge - Page 1357 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ken53007 · 02-01-2018, 02:02 PM

Good times for sure and I see someone has a blue 6th gen zl1

SeaCompiler · 02-01-2018, 07:03 PM

Mike, Dan and Kenneth in da house!

SeaCompiler · 02-01-2018, 07:08 PM

I threw a lifter, so the car is down right now, but getting my new shop built. 303x30 with 12 foot ceilings. Should be finished in 1 week.

ken53007 · 02-01-2018, 09:39 PM

That looks really nice right there! Is it tall enough for a lift?

SeaCompiler · 02-01-2018, 09:52 PM

Quote:

Originally Posted by ken53007

That looks really nice right there! Is it tall enough for a lift?

Thats the plan! 12 foot on sides and 13 in the middle. Lift will have to come later.

ken53007 · 02-01-2018, 10:45 PM

Awsome man!

ken53007 · 02-01-2018, 11:35 PM

Not sure if I did it right but here my new beast

MyLocalDJ · 02-02-2018, 09:41 AM

Yeah I had been watching this thread for some time also and had thought is was dead. Good to see it revived!

Kennesaw/Acworth here.

SeaCompiler · 02-02-2018, 12:30 PM

Nice ZL1 Kenneth! I thought you also had a new bike too?

Nice light work on the Red Camaro MyLocalDJ! I have to say I also have an affinity to lambo doors!

DragRacerX · 02-03-2018, 11:44 AM

Quote:

Originally Posted by ken53007

Good times for sure and I see someone has a blue 6th gen zl1

Yep, I bought it Jun-09th, took possession of it Jun-16th. Found it (after MONTHS of searching via CarGurus WEBSITE) in Knoxville, TN. MSRP was $69,630; after rebates etc, it was out the door for $65,462. It has all 5 of the options available: A10 Trans, Carbon Fiber Hood, Sun Roof, Navigation, & PDR. I got it just in time for CamaroFest VII. So I ran it on the NCM track day & both day of the Beech Bend Dragstrip. I also ran it (& my 2012 2SS) at WannaGoFast's September event in Clayton, GA.

I LOVE THIS CAR!!!

DragRacerX · 02-03-2018, 11:47 AM

Quote:

Originally Posted by SeaCompiler

I threw a lifter, so the car is down right now, but getting my new shop built. 303x30 with 12 foot ceilings. Should be finished in 1 week.

Sorry to hear about the lifter & your car being down - BUT that new shop is OUTRAGEOUS!!!

grandpamike · 02-03-2018, 08:09 PM

hey Cartersville here. Just bought a 2014 2lt rs about three months ago

SeaCompiler · 02-04-2018, 04:11 PM

Congrats on the new ride. Looks like you already have a number of upgrades already underway. I see caliper and rotor upgrades (nice), spoiler, gill stripes, windshield banner, cowl hood wording, side panel vinyl and a big laser target for cops on the front! With those rotor upgrades, I wonder if there are any suspension upgrades if it was ever tracked?

colemanvoice · 02-05-2018, 01:40 PM

Shop looks good. That will be nice to have, I'm sure.

Cool. Zl1

Nice, new Zl1 too.

Welcome to grandpamike

Hot Rod Power Tour will be very local to Atlanta this year.

2018 DATES AND VENUES:

Saturday, June 9 – Bowling Green, KY
Beech Bend Raceway Park

Sunday, June 10 –Chattanooga, TN
Chattanooga State Community College

Monday, June 11 – Hoover, AL
Hoover Metropolitan Stadium

Tuesday, June 12 – Hampton, GA
Atlanta Motor Speedway

Wednesday, June 13 – Darlington, SC
Darlington Raceway

Thursday, June 14 – Raleigh, NC
PNC Arena

Friday, June 15 – Concord, NC
zMAX Dragway

http://www.hotrod.com/events/power-tour/

02-01-2018, 07:03 PM	#18986
SeaCompiler ...not a marine biologist Drives: 2012 Camaro RY SS LS3 Join Date: Mar 2013 Location: Clarkesville, GA Posts: 752 View My Garage	Mike, Dan and Kenneth in da house! __________________ Forged 416 stroker Turbocharged with Huron Speed with Cam Motion custom grind,Tuned by Vengeance, 8psi, 25% PowerBond UDP, Ported TB, shaved heads, LS9 gaskets, chromoly pushrods, BT trunnions & dual valve springs, IWIS, Might Mouse CC, SJM Line Lock,, MSD 2-Step, ZL1 Rear End, ZL1 spoiler, Strut Brace, ARP bolts, Skip shift elim, A-Pillar Gauges, FR Style 41 20X10, 3 inch exhaust, blackouts, Lowered, Custom badges, Hines vents,RPI fender vents, Technostalgia Tail Lights, Metra Kit, Pioneer stereo, Morimoto RGB Halos, "The Great Awakening" on gab.com

02-01-2018, 07:08 PM	#18987
SeaCompiler ...not a marine biologist Drives: 2012 Camaro RY SS LS3 Join Date: Mar 2013 Location: Clarkesville, GA Posts: 752 View My Garage	I threw a lifter, so the car is down right now, but getting my new shop built. 303x30 with 12 foot ceilings. Should be finished in 1 week. Attached Images __________________ Forged 416 stroker Turbocharged with Huron Speed with Cam Motion custom grind,Tuned by Vengeance, 8psi, 25% PowerBond UDP, Ported TB, shaved heads, LS9 gaskets, chromoly pushrods, BT trunnions & dual valve springs, IWIS, Might Mouse CC, SJM Line Lock,, MSD 2-Step, ZL1 Rear End, ZL1 spoiler, Strut Brace, ARP bolts, Skip shift elim, A-Pillar Gauges, FR Style 41 20X10, 3 inch exhaust, blackouts, Lowered, Custom badges, Hines vents,RPI fender vents, Technostalgia Tail Lights, Metra Kit, Pioneer stereo, Morimoto RGB Halos, "The Great Awakening" on gab.com

02-01-2018, 11:35 PM	#18991
ken53007 Drives: 2010 camaro ss Join Date: Dec 2010 Location: acworth ga Posts: 1,721	Not sure if I did it right but here my new beast Attached Images

02-02-2018, 09:41 AM	#18992
MyLocalDJ Drives: 2015 2LS Join Date: Mar 2016 Location: Atlanta Posts: 238	Yeah I had been watching this thread for some time also and had thought is was dead. Good to see it revived! Kennesaw/Acworth here. Attached Images __________________

02-02-2018, 12:30 PM	#18993
SeaCompiler ...not a marine biologist Drives: 2012 Camaro RY SS LS3 Join Date: Mar 2013 Location: Clarkesville, GA Posts: 752 View My Garage	Nice ZL1 Kenneth! I thought you also had a new bike too? Nice light work on the Red Camaro MyLocalDJ! I have to say I also have an affinity to lambo doors! __________________ Forged 416 stroker Turbocharged with Huron Speed with Cam Motion custom grind,Tuned by Vengeance, 8psi, 25% PowerBond UDP, Ported TB, shaved heads, LS9 gaskets, chromoly pushrods, BT trunnions & dual valve springs, IWIS, Might Mouse CC, SJM Line Lock,, MSD 2-Step, ZL1 Rear End, ZL1 spoiler, Strut Brace, ARP bolts, Skip shift elim, A-Pillar Gauges, FR Style 41 20X10, 3 inch exhaust, blackouts, Lowered, Custom badges, Hines vents,RPI fender vents, Technostalgia Tail Lights, Metra Kit, Pioneer stereo, Morimoto RGB Halos, "The Great Awakening" on gab.com

02-01-2018, 02:02 PM	#18985
ken53007 Drives: 2010 camaro ss Join Date: Dec 2010 Location: acworth ga Posts: 1,721	Good times for sure and I see someone has a blue 6th gen zl1

02-01-2018, 09:39 PM	#18988
ken53007 Drives: 2010 camaro ss Join Date: Dec 2010 Location: acworth ga Posts: 1,721	That looks really nice right there! Is it tall enough for a lift?

02-01-2018, 10:45 PM	#18990
ken53007 Drives: 2010 camaro ss Join Date: Dec 2010 Location: acworth ga Posts: 1,721	Awsome man!

02-03-2018, 08:09 PM	#18996
grandpamike Drives: 2014 2lt rs Join Date: Nov 2017 Location: georgia Posts: 90	hey Cartersville here. Just bought a 2014 2lt rs about three months ago Attached Images

02-04-2018, 04:11 PM	#18997
SeaCompiler ...not a marine biologist Drives: 2012 Camaro RY SS LS3 Join Date: Mar 2013 Location: Clarkesville, GA Posts: 752 View My Garage	Congrats on the new ride. Looks like you already have a number of upgrades already underway. I see caliper and rotor upgrades (nice), spoiler, gill stripes, windshield banner, cowl hood wording, side panel vinyl and a big laser target for cops on the front! With those rotor upgrades, I wonder if there are any suspension upgrades if it was ever tracked? __________________ Forged 416 stroker Turbocharged with Huron Speed with Cam Motion custom grind,Tuned by Vengeance, 8psi, 25% PowerBond UDP, Ported TB, shaved heads, LS9 gaskets, chromoly pushrods, BT trunnions & dual valve springs, IWIS, Might Mouse CC, SJM Line Lock,, MSD 2-Step, ZL1 Rear End, ZL1 spoiler, Strut Brace, ARP bolts, Skip shift elim, A-Pillar Gauges, FR Style 41 20X10, 3 inch exhaust, blackouts, Lowered, Custom badges, Hines vents,RPI fender vents, Technostalgia Tail Lights, Metra Kit, Pioneer stereo, Morimoto RGB Halos, "The Great Awakening" on gab.com

02-05-2018, 01:40 PM	#18998
colemanvoice team chicklet camaro Drives: MOTL3Y Join Date: Jan 2009 Location: Cumming GA Posts: 1,384 View My Garage	Shop looks good. That will be nice to have, I'm sure. Cool. Zl1 Nice, new Zl1 too. Welcome to grandpamike Hot Rod Power Tour will be very local to Atlanta this year. 2018 DATES AND VENUES: Saturday, June 9 – Bowling Green, KY Beech Bend Raceway Park Sunday, June 10 –Chattanooga, TN Chattanooga State Community College Monday, June 11 – Hoover, AL Hoover Metropolitan Stadium Tuesday, June 12 – Hampton, GA Atlanta Motor Speedway Wednesday, June 13 – Darlington, SC Darlington Raceway Thursday, June 14 – Raleigh, NC PNC Arena Friday, June 15 – Concord, NC zMAX Dragway http://www.hotrod.com/events/power-tour/ __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does Anyone Use a Club?	PercyJWellingtonIII	5th Gen Camaro SS LS LT General Discussions	51	12-31-2011 08:05 AM
CAJUN CAMARO CLUB/ Meeting to formalize our club	GATORJAK	USA - Southcentral	124	03-20-2011 08:22 PM
In the process of starting a new Camaro Club this year!	Blue Maro Demon	USA - Southeast	0	01-23-2011 11:51 PM
Eastern TN 5th GEN Camaro Club	304hp?	USA - Southeast	0	02-04-2010 03:11 AM
Club Day at Speedworld in January on a Sunday	chellzers	USA - Southwest	0	01-03-2010 04:39 PM