LED tail light bulb, HELP !!! - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BigRed82 · 01-25-2016, 01:57 PM

Quote:

Originally Posted by 2SSRS@Gen5diy

That's for the gen6 car.

I wonder why mine flicker then? Guess I'll try out the Phillips LEDs

LiveWireXIII · 09-14-2021, 07:37 PM

Hey guys, looking for some help. I’ve got the Vland 6th gen headlights and taillights with Vland Led D2H low beam/high beam LED bulbs. I’ve got a hyper flash issue on the left side. The 6th gen headlight housing and 6th gen taillights both say no added resistors needed and led headlight bulbs have drivers in them as well. Both appear to have built in resistors and no bulbs are out, but why am I still getting hyper flash? I am not getting any error messages on the dash either. It just flashes 2-3 times normally and then goes straight into hyperflash non stop. Would new LED headlight bulbs fix? They’ve worked for a year and a half now and only just started doing this.

Joe.G · 09-30-2021, 07:12 AM

What resistors are you guys using?

AlanRubin · 10-02-2021, 01:26 AM

I am ALL LED and HID, and I am not using any resisters.

I don't care about hyper-flash, it's actually more noticeable to other motorists.

I don't care about the light out warnings either, so...

Joe.G · 10-02-2021, 05:37 AM

So Alan you have the warning lights and the hyper flash? I don't want either, car is perfect don't feel like staring at warning lights.

ghost_l2yder · 01-16-2022, 06:20 PM

Are you guys aware there are sockets that are plug n play play that eliminate the hyper flash without splicing ???

Joe.G · 01-16-2022, 07:17 PM

A Link Ghost? I know there are resistors and what not that can be spliced in. The Delay is annoying.

davesnever · 01-21-2022, 09:52 PM

I think what Ghost is referring to are the prewired plug and play harnesses you can buy without splicing into the factory harness. They can be found all over the internet and the prices have a wide range too lol. I have not converted to LED myself but if I were to do this I would want to try this method first as it should be foolproof and if you buy a good harness there should be enough slack in the wiring harness to keep the resistor itself in a location that won't melt anything. Search for "LED wiring harness" and pick your poison lol!

09-14-2021, 07:37 PM	#30
LiveWireXIII Drives: 2014 Chevrolet Camaro 2LS Join Date: Apr 2020 Location: Kansas Posts: 10	hyperflash issue Hey guys, looking for some help. I’ve got the Vland 6th gen headlights and taillights with Vland Led D2H low beam/high beam LED bulbs. I’ve got a hyper flash issue on the left side. The 6th gen headlight housing and 6th gen taillights both say no added resistors needed and led headlight bulbs have drivers in them as well. Both appear to have built in resistors and no bulbs are out, but why am I still getting hyper flash? I am not getting any error messages on the dash either. It just flashes 2-3 times normally and then goes straight into hyperflash non stop. Would new LED headlight bulbs fix? They’ve worked for a year and a half now and only just started doing this.

09-30-2021, 07:12 AM	#31
Joe.G Drives: 2014 2SS/RS 6SP Ashen Grey Join Date: Aug 2021 Location: NY Posts: 1,264	What resistors are you guys using? __________________ GM 3.91/TrueTrac OEM ZL1 Rims, Brakes & Side Skirts.ACST4 Splitter/Deflectors NPP M2W,GM Short Throw,Remote Clutch reservoir GPI Ported Rod Mod,BO White PTB,CAI/JRE Scoop, Moroso Catch Can GC Aluminum DS Stainless Works Ceramic LTH/HiFlo Cats SCT X4 Dynosteve, Hotckis 1" Springs & Chassis Max Brace BMR Adjustable Swaybars,Trailing Arms, Adjustable Toe Rod, LCA & Z28 UCA Bushings Hendrix Solid Cradle Bushings Pedders Radius Rod Inserts Strut tower brace Hero Smoked Tail and 3rd Brake Light, Diode Dynamic SL1 Fog Lights AeroForce Dual gauge/Autometer pillar mount.

10-02-2021, 05:37 AM	#33
Joe.G Drives: 2014 2SS/RS 6SP Ashen Grey Join Date: Aug 2021 Location: NY Posts: 1,264	So Alan you have the warning lights and the hyper flash? I don't want either, car is perfect don't feel like staring at warning lights. __________________ GM 3.91/TrueTrac OEM ZL1 Rims, Brakes & Side Skirts.ACST4 Splitter/Deflectors NPP M2W,GM Short Throw,Remote Clutch reservoir GPI Ported Rod Mod,BO White PTB,CAI/JRE Scoop, Moroso Catch Can GC Aluminum DS Stainless Works Ceramic LTH/HiFlo Cats SCT X4 Dynosteve, Hotckis 1" Springs & Chassis Max Brace BMR Adjustable Swaybars,Trailing Arms, Adjustable Toe Rod, LCA & Z28 UCA Bushings Hendrix Solid Cradle Bushings Pedders Radius Rod Inserts Strut tower brace Hero Smoked Tail and 3rd Brake Light, Diode Dynamic SL1 Fog Lights AeroForce Dual gauge/Autometer pillar mount.

01-16-2022, 07:17 PM	#35
Joe.G Drives: 2014 2SS/RS 6SP Ashen Grey Join Date: Aug 2021 Location: NY Posts: 1,264	A Link Ghost? I know there are resistors and what not that can be spliced in. The Delay is annoying. __________________ GM 3.91/TrueTrac OEM ZL1 Rims, Brakes & Side Skirts.ACST4 Splitter/Deflectors NPP M2W,GM Short Throw,Remote Clutch reservoir GPI Ported Rod Mod,BO White PTB,CAI/JRE Scoop, Moroso Catch Can GC Aluminum DS Stainless Works Ceramic LTH/HiFlo Cats SCT X4 Dynosteve, Hotckis 1" Springs & Chassis Max Brace BMR Adjustable Swaybars,Trailing Arms, Adjustable Toe Rod, LCA & Z28 UCA Bushings Hendrix Solid Cradle Bushings Pedders Radius Rod Inserts Strut tower brace Hero Smoked Tail and 3rd Brake Light, Diode Dynamic SL1 Fog Lights AeroForce Dual gauge/Autometer pillar mount.

01-21-2022, 09:52 PM	#36
davesnever Drives: 2010 Camaro 2SS Join Date: Sep 2015 Location: Richmond Hill ,Ontario, Canada Posts: 780 View My Garage	I think what Ghost is referring to are the prewired plug and play harnesses you can buy without splicing into the factory harness. They can be found all over the internet and the prices have a wide range too lol. I have not converted to LED myself but if I were to do this I would want to try this method first as it should be foolproof and if you buy a good harness there should be enough slack in the wiring harness to keep the resistor itself in a location that won't melt anything. Search for "LED wiring harness" and pick your poison lol! Attached Images

10-02-2021, 01:26 AM	#32
AlanRubin Banned Drives: 2010 LS Join Date: Feb 2021 Location: Pgh Posts: 411	I am ALL LED and HID, and I am not using any resisters. I don't care about hyper-flash, it's actually more noticeable to other motorists. I don't care about the light out warnings either, so...

01-16-2022, 06:20 PM	#34
ghost_l2yder Drives: 2013 camaro zl1 Join Date: Oct 2014 Location: United States Posts: 53	Are you guys aware there are sockets that are plug n play play that eliminate the hyper flash without splicing ???